What To Know
- To determine if the pump is functioning correctly, disconnect the hose from the pump outlet and turn on the carpet cleaner.
- Ensure that the power cord is properly plugged into a working outlet and that there is no damage to the cord or the plug.
- The float valve is a small device that regulates the water flow in the carpet cleaner.
If you’re facing the frustrating issue of your Bissell carpet cleaner not spraying water, you’re not alone. This common problem can be caused by various factors, ranging from simple maintenance issues to more complex mechanical problems. In this comprehensive guide, we’ll delve into the underlying causes and provide step-by-step solutions to get your carpet cleaner back in tip-top shape.
1. Inspect the Water Tank
a) Empty and Refill the Water Tank:
Start by checking if the water tank is properly filled. Empty the tank completely and refill it with clean, warm water. Ensure that the water level is between the indicated marks on the tank.
b) Clean the Water Tank:
Over time, dirt and debris can accumulate in the water tank, clogging the outlet. Remove the water tank and thoroughly clean it using a mild detergent and warm water. Rinse the tank thoroughly and allow it to dry completely before reattaching it.
2. Inspect the Spray Nozzles
a) Check for Clogs:
The spray nozzles are responsible for distributing water evenly onto the carpet. If they are clogged, the water flow will be obstructed. Disconnect the spray nozzles from the hose and inspect them for any visible clogs. Use a toothpick or a small brush to gently remove any debris or hair tangled around the nozzles.
b) Adjust the Spray Nozzle:
Sometimes, the spray nozzle may be improperly adjusted, resulting in poor water flow. Ensure that the nozzle is properly aligned with the water outlet and is not pointing in the wrong direction. Adjust the nozzle as needed to ensure optimal water distribution.
3. Examine the Hose
a) Check for Kinks or Leaks:
A kinked or leaking hose can restrict water flow and prevent the carpet cleaner from spraying water properly. Inspect the entire length of the hose for any kinks or cracks. Straighten out any kinks and repair or replace any damaged sections of the hose.
b) Clean the Hose:
Dirt and debris can also accumulate inside the hose, causing blockages. Disconnect the hose from the carpet cleaner and rinse it thoroughly with warm water. You can use a hose attachment or a garden hose to flush out any stubborn debris. Allow the hose to dry completely before reattaching it.
4. Investigate the Pump
a) Check the Pump Filter:
The pump filter plays a crucial role in preventing debris from entering the pump and causing damage. Locate the pump filter and inspect it for any clogs or blockages. Clean or replace the filter as needed.
b) Test the Pump:
To determine if the pump is functioning correctly, disconnect the hose from the pump outlet and turn on the carpet cleaner. If water flows out of the pump outlet, the pump is working properly. If there is no water flow, the pump may be faulty and require repair or replacement.
5. Check the Electrical Connections
a) Inspect the Power Cord:
Ensure that the power cord is properly plugged into a working outlet and that there is no damage to the cord or the plug. Try using a different outlet to rule out any electrical issues.
b) Examine the Circuit Breaker:
If the carpet cleaner is plugged into a circuit breaker, check if the breaker has tripped. Reset the breaker and try operating the carpet cleaner again.
6. Clean the Float Valve
a) Locate the Float Valve:
The float valve is a small device that regulates the water flow in the carpet cleaner. It is typically located inside the water tank.
b) Clean the Float Valve:
Remove the float valve from the tank and inspect it for any dirt or debris. Clean the valve thoroughly and ensure that it moves freely up and down. Reinstall the float valve and check if the carpet cleaner is spraying water properly.
7. Troubleshooting Advanced Issues
a) Inspect the Water Pump:
If you have tried all the above solutions and the carpet cleaner is still not spraying water, the water pump may be faulty. The water pump is responsible for circulating water through the system. If it is not functioning correctly, it can cause water flow problems.
b) Check the Belts and Pulleys:
The belts and pulleys in the carpet cleaner are responsible for transferring power from the motor to the pump. If any of these components are worn or damaged, it can affect the water flow. Inspect the belts and pulleys for any signs of wear or damage and replace them if necessary.
Solved: Your Bissell Carpet Cleaner is Spraying Water Again!
By following the troubleshooting steps outlined in this guide, you can effectively resolve the issue of your Bissell carpet cleaner not spraying water. Whether it’s a simple maintenance issue or a more complex mechanical problem, this comprehensive guide provides the solutions you need to get your carpet cleaner back in action and your carpets sparkling clean.
Frequently Asked Questions
Q: Why is my Bissell carpet cleaner not spraying water even though the water tank is full?
A: There could be several reasons for this. Check for clogs in the spray nozzles, hose, or water tank. Ensure that the pump filter is clean and that the pump is functioning properly. Inspect the electrical connections and make sure that the float valve is clean and moving freely.
Q: What should I do if the spray nozzles are clogged?
A: Disconnect the spray nozzles from the hose and use a toothpick or a small brush to gently remove any debris or hair tangled around the nozzles. Rinse the nozzles thoroughly with warm water and reattach them to the hose.
Q: How can I prevent my Bissell carpet cleaner from getting clogged?
A: Regular maintenance is key to preventing clogs. Empty and refill the water tank with clean water after each use. Rinse the hose and spray nozzles thoroughly and allow them to dry completely. Clean the pump filter regularly and inspect the belts and pulleys for any signs of wear or damage.
