In the icy depths of Subnautica Below Zero, the Base Attached Air Pump serves as a crucial tool for maintaining a breathable atmosphere within your underwater base. This guide will provide you with a step-by-step walkthrough on how to acquire and utilize this essential piece of equipment.
Crafting the Base Attached Air Pump
Materials Required:
- 1x Titanium Ingot
- 1x Battery
- 2x Rubber
- 1x Lubricant
Crafting Instructions:
1. Access the Fabricator in your base.
2. Select the “Electronics” tab.
3. Find the “Base Attached Air Pump” blueprint and click “Craft.”
4. The crafting process will take a few seconds.
Installing the Air Pump
Location:
The Base Attached Air Pump can only be installed on the exterior of a Multipurpose Room or Moonpool.
Installation Instructions:
1. Equip the Base Attached Air Pump from your inventory.
2. Approach the Multipurpose Room or Moonpool.
3. Look for a blue square outline on the wall.
4. Click to install the Air Pump.
Using the Air Pump
Function:
The Base Attached Air Pump draws oxygen from the surrounding water and pumps it into your base.
Activation:
1. Power the Air Pump by connecting it to a power source (e.g., Bioreactor, Thermal Plant).
2. Click on the Air Pump to turn it on.
Monitoring:
The Air Pump‘s status can be monitored through the Base Terminal. It will display the current oxygen level and power consumption.
Troubleshooting
No Oxygen Output:
- Ensure the Air Pump is powered.
- Check if the Air Pump is connected to a Multipurpose Room or Moonpool.
- Verify that the blue square outline for installation is present.
Low Oxygen Output:
- Increase the power supply to the Air Pump.
- Consider installing multiple Air Pumps.
- Clear any obstructions around the Air Pump’s intake.
Power Consumption High:
- Reduce the number of Air Pumps installed.
- Upgrade the power source to a more efficient one.
Tips for Efficient Oxygen Management
- Install Air Pumps in well-ventilated areas.
- Avoid placing Air Pumps near heat sources or other oxygen-consuming devices.
- Consider using Oxygen Plants to supplement oxygen production.
- Monitor the oxygen level regularly and adjust the number of Air Pumps accordingly.
Key Points: The Lifeline of Your Underwater Base
The Base Attached Air Pump is an indispensable tool for creating a habitable environment in Subnautica Below Zero. By following the steps outlined in this guide, you can effectively acquire, install, and utilize this vital piece of equipment to ensure a continuous supply of oxygen for your underwater adventures. Remember, a well-oxygenated base is a thriving base!
Information You Need to Know
Q: Can the Base Attached Air Pump be installed on a Seabase?
A: No, the Base Attached Air Pump can only be installed on a Multipurpose Room or Moonpool.
Q: How many Air Pumps do I need for a large base?
A: The number of Air Pumps required depends on the size and layout of your base. As a general rule, one Air Pump can support a small to medium-sized base, while larger bases may require multiple Air Pumps.
Q: Can I upgrade the Base Attached Air Pump?
A: No, the Base Attached Air Pump cannot be upgraded. However, you can install multiple Air Pumps to increase oxygen output.
Q: What is the maximum oxygen output of the Base Attached Air Pump?
A: The Base Attached Air Pump has a maximum oxygen output of 40 units per second.
Q: Can I place the Air Pump underwater?
A: No, the Air Pump must be placed above water.
