What To Know
- The broil element is typically located at the top of the cavity, running from one side to the other.
- Place the element cover back over the broil element and secure it with the screws.
- Replacing a KitchenAid oven broil element is a relatively simple task that can be completed in just a few steps.
If your KitchenAid oven‘s broil element has stopped working, don’t despair. Replacing it is a relatively straightforward task that can be completed in just a few steps. In this comprehensive guide, we’ll walk you through the entire process, from gathering the necessary tools to installing the new element.
Materials You’ll Need
Before you begin, gather the following materials:
- KitchenAid oven broil element
- Screwdriver
- Work gloves
- Safety glasses
- Flashlight
Safety First
Before you start any work on your oven, ensure that it is unplugged from the power outlet. Also, wear safety glasses and work gloves to protect yourself from any potential hazards.
Step 1: Locate the Broil Element
Open the oven door and look at the top of the oven cavity. The broil element is typically located at the top of the cavity, running from one side to the other.
Step 2: Remove the Element Cover
Using a screwdriver, remove the screws that hold the element cover in place. The cover is usually located at the front of the broil element.
Step 3: Disconnect the Wires
Once the cover is removed, you’ll see the broil element. Disconnect the wires from the element by unplugging them from the terminals.
Step 4: Remove the Broil Element
Grab the broil element and pull it straight out of the oven cavity. It should come out easily.
Step 5: Install the New Element
Take the new broil element and insert it into the oven cavity. Make sure that it is aligned correctly and that the wires are facing the terminals.
Step 6: Connect the Wires
Reconnect the wires to the terminals on the new element. Make sure that the wires are securely plugged in.
Step 7: Replace the Element Cover
Place the element cover back over the broil element and secure it with the screws.
Troubleshooting
If you encounter any problems during the replacement process, here are a few troubleshooting tips:
- If the broil element doesn’t heat up, check the wires to make sure they are properly connected.
- If the broil element heats up but doesn’t get hot enough, it may be faulty. Replace it with a new one.
- If you have any other problems, consult the user manual for your specific KitchenAid oven model.
Takeaways
Replacing a KitchenAid oven broil element is a relatively simple task that can be completed in just a few steps. By following the instructions in this guide, you can save yourself the cost of hiring a professional repair technician.
Questions We Hear a Lot
Q: How often should I replace my oven broil element?
A: The lifespan of an oven broil element varies depending on usage. However, it is generally recommended to replace it every 5-7 years.
Q: Can I use a different brand of broil element in my KitchenAid oven?
A: No, it is not recommended to use a different brand of broil element in your KitchenAid oven. Using a different brand may void your warranty and cause safety issues.
Q: What are the signs of a faulty broil element?
A: Signs of a faulty broil element include uneven heating, slow heating, or no heating at all.
