Are you struggling to get your GE oven drawer back on track? Don’t worry; this step-by-step guide will provide you with all the information you need to fix it quickly and easily.
Tools You’ll Need
Before you start, gather the following tools:
- Screwdriver
- Pliers
- Flashlight (optional)
- Lubricant (optional)
Safety Precautions
Before beginning any work, disconnect the oven from its power source.
Step 1: Remove the Oven Drawer
- Open the oven door and pull out the drawer as far as it will go.
- Locate the two screws on the sides of the drawer near the front.
- Remove the screws and carefully lift the drawer straight up and out.
Step 2: Inspect the Tracks
- Once the drawer is removed, inspect the tracks on the sides of the oven cavity.
- Look for any obstructions, debris, or damage.
- Clean the tracks using a damp cloth and remove any obstructions.
Step 3: Reinstall the Tracks
- If the tracks are damaged, you may need to replace them.
- To reinstall the tracks, align them with the holes in the oven cavity and slide them into place.
- Secure the tracks with the screws you removed earlier.
Step 4: Lubricate the Tracks (Optional)
- Applying a small amount of lubricant to the tracks can help prevent future problems.
- Use a silicone-based lubricant and apply it sparingly to the tracks.
Step 5: Align the Drawer
- Lift the drawer and align it with the tracks on the sides of the oven cavity.
- Carefully lower the drawer into place, ensuring it slides smoothly.
Step 6: Secure the Drawer
- Once the drawer is aligned, insert the screws into the holes on the sides of the drawer.
- Tighten the screws securely.
Step 7: Test the Drawer
- Open and close the drawer several times to ensure it slides smoothly and stays on track.
Troubleshooting Tips
- If the drawer still doesn’t slide smoothly, check for any obstructions or damage to the drawer or tracks.
- If the tracks are bent or damaged, you may need to replace them.
- If the drawer is sticking, apply a small amount of lubricant to the tracks.
Conclusion
Putting a GE oven drawer back on track is a relatively simple task that you can complete in a few minutes. By following these steps, you can ensure that your oven drawer is functioning properly and safely.
FAQ
Q: Why is my GE oven drawer not sliding smoothly?
A: There could be several reasons, including obstructions in the tracks, damage to the drawer or tracks, or lack of lubrication.
Q: How often should I lubricate the oven drawer tracks?
A: Lubrication is not necessary unless the drawer is sticking. If needed, apply a small amount of silicone-based lubricant.
Q: Can I replace the oven drawer tracks myself?
A: Yes, you can replace the tracks yourself with some basic tools and the correct replacement parts.
