Stop oven frustrations! learn the quick and easy way to replace a frigidaire oven bake element
Replacing a faulty bake element in your Frigidaire oven can restore your appliance to optimal performance. This comprehensive guide will walk you through the steps involved in this task, ensuring a safe and successful repair.
Materials Required
- New Frigidaire oven bake element
- Screwdriver (Phillips and flathead)
- Wire strippers
- Electrical tape
- Gloves
- Safety glasses
Safety Precautions
- Unplug the oven from the power outlet before starting any work.
- Allow the oven to cool completely before touching any internal components.
- Wear gloves and safety glasses for protection.
- If you are not comfortable with electrical work, seek professional assistance.
Step-by-Step Instructions
1. Access the Oven Cavity
- Open the oven door and remove the oven racks.
- Locate the screws securing the lower oven panel (usually at the bottom of the oven cavity).
- Remove the screws and carefully pull the lower panel towards you to detach it.
2. Disconnect the Power
- Identify the electrical wires connected to the bake element.
- Use a screwdriver to loosen the screws holding the wires in place.
- Carefully disconnect the wires and wrap them with electrical tape to prevent accidental contact.
3. Remove the Bake Element
- Locate the two screws securing the bake element to the oven cavity.
- Remove the screws and carefully pull the bake element straight out.
4. Install the New Bake Element
- Align the new bake element with the mounting holes in the oven cavity.
- Insert the screws and tighten them securely.
5. Reconnect the Power
- Unwrap the electrical tape from the wires.
- Reconnect the wires to the terminals on the bake element, ensuring they are securely fastened.
- Tighten the screws holding the wires in place.
6. Reattach the Lower Oven Panel
- Carefully slide the lower oven panel back into place.
- Secure it with the screws removed earlier.
7. Test the Bake Element
- Plug the oven back into the power outlet.
- Turn the oven to the “Bake” setting and set the temperature to 350°F (175°C).
- Allow the oven to heat up for 15-20 minutes.
- Open the oven door and check if the bake element is glowing red. If it is, the replacement was successful.
Troubleshooting
- Element not heating: Check the electrical connections and ensure the wires are securely fastened.
- Oven overheating: The temperature sensor may be faulty. Consider replacing it.
- Element glowing unevenly: The element may be damaged or the oven cavity may have uneven insulation.
Summary: Master the Art of Frigidaire Oven Bake Element Replacement
With these step-by-step instructions and safety precautions, you can confidently replace the bake element in your Frigidaire oven, restoring it to its peak performance. Remember, if you encounter any difficulties or are unsure about any aspect of the repair, do not hesitate to consult a qualified appliance repair technician.
Frequently Discussed Topics
Q: How often should I replace my Frigidaire oven bake element?
A: The average lifespan of a bake element is 5-10 years, depending on usage.
Q: Can I use a generic bake element in my Frigidaire oven?
A: It is recommended to use a genuine Frigidaire bake element to ensure compatibility and optimal performance.
Q: What are the signs of a faulty bake element?
A: Signs include uneven baking, slow heating, or complete failure to heat.