What To Know
- Fortunately, testing the control board is a relatively straightforward process that can help you determine if it’s the root cause of your oven’s issues.
- Touch one probe of the multimeter to one of the terminals on the control board.
- The cost of replacing a Whirlpool oven control board varies depending on the model and complexity of the repair.
A malfunctioning oven control board can render your Whirlpool oven useless, leaving you unable to cook your favorite meals. Fortunately, testing the control board is a relatively straightforward process that can help you determine if it’s the root cause of your oven’s issues. Here’s a comprehensive guide to help you test your Whirlpool oven control board:
Safety Precautions
Before you begin, it’s crucial to take the necessary safety precautions:
- Unplug your oven from the power outlet.
- Allow the oven to cool completely.
- Wear insulated gloves to protect your hands.
Locate the Control Board
1. Open the oven door and remove the racks.
2. Locate the control panel at the front of the oven.
3. Remove the screws holding the control panel in place.
4. Carefully pull the control panel forward.
5. You will see a metal box attached to the back of the control panel. This is the control board.
Visual Inspection
1. Inspect the control board for any visible damage, such as burn marks, loose wires, or melted components.
2. If you notice any damage, the control board likely needs to be replaced.
Continuity Test
1. Set your multimeter to the continuity setting.
2. Touch one probe of the multimeter to one of the terminals on the control board.
3. Touch the other probe to another terminal on the control board.
4. If the multimeter beeps, it indicates that there is continuity between the two terminals.
5. Repeat this process for all the terminals on the control board.
6. If you encounter any terminals that do not have continuity, the control board may be faulty.
Voltage Test
1. Set your multimeter to the AC voltage setting.
2. Connect one probe of the multimeter to the hot wire coming into the oven.
3. Connect the other probe of the multimeter to the neutral wire coming into the oven.
4. Turn on the oven.
5. The multimeter should read 120 volts.
6. If the multimeter does not read 120 volts, the control board may not be receiving power.
Replace the Control Board
If you have determined that the control board is faulty, you will need to replace it. Here are the steps involved:
1. Unplug the oven from the power outlet.
2. Remove the screws holding the control board in place.
3. Carefully pull the control board out.
4. Disconnect the wires from the control board.
5. Connect the wires to the new control board.
6. Slide the new control board into place.
7. Secure the control board with the screws.
8. Reattach the control panel.
9. Plug the oven back into the power outlet.
Conclusion:
Testing your Whirlpool oven control board is a valuable troubleshooting step that can help you determine if it’s the cause of your oven’s problems. By following the steps outlined in this guide, you can confidently diagnose and repair your oven, restoring it to full functionality.
Frequently Asked Questions
How do I know if my Whirlpool oven control board is bad?
- The oven does not turn on or heat up.
- The oven cycles on and off repeatedly.
- The oven temperature fluctuates erratically.
- The oven displays error codes.
Can I repair the Whirlpool oven control board myself?
- While it is possible to repair a control board, it requires specialized knowledge and equipment. It’s generally recommended to contact a qualified appliance technician for repairs.
How much does it cost to replace a Whirlpool oven control board?
- The cost of replacing a Whirlpool oven control board varies depending on the model and complexity of the repair. However, you can expect to pay between $200 and $500 for parts and labor.
