Removing the pedestal drawer from your Electrolux dryer is a simple task that can be easily accomplished with the right tools and a few simple steps. Whether you need to access the dryer’s lint filter or perform maintenance, this guide will provide you with all the necessary instructions to safely and effectively remove the pedestal drawer.
Tools You’ll Need
- Screwdriver (Phillips or flathead)
- Adjustable wrench (optional)
Step-by-Step Instructions
1. Unplug the Dryer
For safety reasons, always unplug the dryer from the electrical outlet before beginning any work.
2. Open the Drawer
Pull the pedestal drawer open to its fully extended position.
3. Locate the Screws
On the left and right sides of the drawer, you will find two screws that secure it to the pedestal base.
4. Remove the Screws
Using a screwdriver, remove the screws from both sides. Some models may have additional screws at the back of the drawer. If so, remove those as well.
5. Lift the Drawer
Once the screws are removed, gently lift the front of the drawer up and out of the pedestal base.
6. Disconnect the Electrical Cable (Optional)
If your dryer has an electrical cable connected to the pedestal drawer, disconnect it by unplugging it from the outlet on the back of the drawer.
7. Remove the Drawer
Carefully slide the drawer forward and out of the pedestal base.
Reinstalling the Pedestal Drawer
To reinstall the pedestal drawer, simply reverse the steps above.
1. Slide the drawer back into the pedestal base.
2. Connect the electrical cable (if applicable).
3. Lift the front of the drawer and slide it down into place.
4. Tighten the screws on both sides of the drawer.
Troubleshooting Tips
- If the drawer is stuck, try gently tapping it with a rubber mallet or hammer while pulling it out.
- If the screws are rusted or stripped, you may need to use an adjustable wrench to remove them.
- If the drawer is damaged or broken, it may need to be replaced.
Safety Precautions
- Always unplug the dryer before removing the pedestal drawer.
- If you are not comfortable performing this task yourself, contact a qualified appliance repair technician.
- Do not attempt to remove the pedestal drawer while the dryer is running or hot.
Final Note: A Tidy and Accessible Laundry Room
Removing the pedestal drawer from your Electrolux dryer is a straightforward process that can be completed in just a few minutes. By following these simple steps, you can easily access the lint filter, perform maintenance, or simply clean the drawer to keep your laundry room tidy and organized.
Questions We Hear a Lot
Q: Why should I remove the pedestal drawer on my Electrolux dryer?
A: Removing the pedestal drawer allows you to access the dryer’s lint filter, perform maintenance, or clean the drawer.
Q: How often should I remove the pedestal drawer to clean it?
A: It is recommended to remove and clean the pedestal drawer at least once a year.
Q: Can I remove the pedestal drawer while the dryer is running?
A: No, you should always unplug the dryer and allow it to cool down before removing the pedestal drawer.
Q: What should I do if the screws on the pedestal drawer are rusted or stripped?
A: If the screws are rusted or stripped, you may need to use an adjustable wrench to remove them. Alternatively, you can contact a qualified appliance repair technician for assistance.
Q: Can I replace the pedestal drawer if it is damaged or broken?
A: Yes, you can purchase a replacement pedestal drawer from Electrolux or a third-party retailer.
