What To Know
- If the door is not opening or closing properly after you have reversed it, check to make sure that the hinges are properly aligned and that the door switch wires are securely connected.
- Reversing the door on an Electrolux dryer is a relatively simple process that can be completed in a few steps.
- By following the instructions in this guide, you can reverse the door on your dryer and have it opening in the direction that best suits your laundry room layout.
Yes, the door on an Electrolux dryer can be reversed to open from either the left or right side. This can be a convenient option if your laundry room layout requires the dryer door to open in a specific direction. In this blog post, we will provide a step-by-step guide on how to reverse the door on an Electrolux dryer, as well as some additional tips and troubleshooting advice.
Tools and Materials You’ll Need
Before you begin, gather the following tools and materials:
- Phillips head screwdriver
- Flat head screwdriver
- Wrench or pliers
- Assistant (optional)
Step-by-Step Guide to Reversing the Electrolux Dryer Door
1. Unplug the Dryer and Empty the Lint Trap
Safety first! Unplug the dryer from the electrical outlet and empty the lint trap to avoid any debris from falling out when you remove the door.
2. Remove the Top Panel
Locate the two screws at the back of the dryer that secure the top panel. Use a Phillips head screwdriver to remove these screws and carefully lift the top panel off the dryer.
3. Disconnect the Door Switch Wires
Inside the dryer, you will see two wires connected to the door switch. Use a flat head screwdriver to disconnect these wires.
4. Remove the Door Hinges
There are two hinges that hold the door in place. Use a wrench or pliers to loosen the nuts that secure the hinges. Once the nuts are loose, you can remove the hinges and the door.
5. Reverse the Door
Place the door on a flat surface and locate the four screws that secure the door handle. Remove these screws and switch the handle to the opposite side of the door.
6. Reinstall the Door
Lift the door back into place and align it with the hinges. Secure the hinges with the nuts that you removed earlier.
7. Reconnect the Door Switch Wires
Reconnect the two wires to the door switch. Make sure that the wires are securely connected.
8. Reinstall the Top Panel
Place the top panel back on the dryer and secure it with the two screws that you removed earlier.
9. Plug in the Dryer and Test
Plug the dryer back into the electrical outlet and turn it on. Open and close the door to ensure that it is opening and closing properly.
Additional Tips
- If you have an assistant, it will be helpful to have them hold the door in place while you remove and reinstall the hinges.
- If you are having difficulty removing the hinges, you can try using a penetrating oil to loosen them up.
- If the door is not opening or closing properly after you have reversed it, check to make sure that the hinges are properly aligned and that the door switch wires are securely connected.
Troubleshooting
- The door is not opening or closing properly. Check to make sure that the hinges are properly aligned and that the door switch wires are securely connected.
- The door is hitting the dryer frame. Adjust the hinges to ensure that the door is not hitting the frame when it is opened or closed.
- The door is making a noise when it is opened or closed. Check to make sure that the hinges are properly lubricated.
In a nutshell: Reversing Your Electrolux Dryer Door with Ease
Reversing the door on an Electrolux dryer is a relatively simple process that can be completed in a few steps. By following the instructions in this guide, you can reverse the door on your dryer and have it opening in the direction that best suits your laundry room layout.
Basics You Wanted To Know
Q: Can I reverse the door on any Electrolux dryer?
A: Yes, the door on most Electrolux dryers can be reversed.
Q: Do I need any special tools to reverse the door?
A: You will need a Phillips head screwdriver, a flat head screwdriver, and a wrench or pliers.
Q: How long will it take to reverse the door?
A: The process should take about 30 minutes to complete.
Q: Can I reverse the door myself?
A: Yes, you can reverse the door yourself by following the instructions in this guide.
Q: What should I do if I have difficulty reversing the door?
A: If you have difficulty reversing the door, you can contact Electrolux customer service for assistance.
