What To Know
- If the vent is clogged or damaged, it can cause the dryer to overheat and shut off prematurely.
- The moisture sensor detects the moisture level in the clothes and adjusts the drying time accordingly.
- Once the towel is dry, reset the dryer by unplugging it for 30 seconds and then plugging it back in.
Are you tired of your Samsung dryer stopping prematurely, leaving your clothes damp and frustrating you? If so, you’re not alone. Many users have reported this issue, but don’t worry – there are several effective solutions you can try to make your Samsung dryer keep drying. In this comprehensive guide, we’ll explore the most common causes for this problem and provide step-by-step instructions on how to resolve them.
Inspect the Power Supply
Ensure that your dryer is receiving a consistent power supply. Check if the power cord is securely plugged into both the dryer and the wall outlet. If it’s loose, reconnect it firmly. Additionally, verify that the outlet is functioning correctly by plugging another appliance into it.
Clean the Lint Screen
A clogged lint screen is a major culprit for dryers that stop drying. Lint buildup can restrict airflow, preventing the dryer from properly heating and drying your clothes. After every load, remove the lint screen and clean it thoroughly with a brush or vacuum cleaner.
Check the Vent System
The vent system is responsible for exhausting hot, moist air from the dryer. If the vent is clogged or damaged, it can cause the dryer to overheat and shut off prematurely. Inspect the vent pipe for any kinks, blockages, or damage. If necessary, clean or replace the vent pipe.
Examine the Exhaust Fan
The exhaust fan is an essential component of the vent system. It draws air from the dryer and expels it outside. If the exhaust fan is not working properly, it can lead to poor airflow and dryer shutdown. Check if the fan is running by placing a piece of paper near the vent opening. If the paper doesn’t move, the fan may need to be replaced.
Reset the Dryer
Sometimes, a simple reset can resolve minor issues with your Samsung dryer. Unplug the dryer from the power outlet and wait for 30 seconds. Then, plug it back in and restart the drying cycle. This may help reset any internal settings and restore normal operation.
Calibrate the Moisture Sensor
The moisture sensor detects the moisture level in the clothes and adjusts the drying time accordingly. If the sensor is not calibrated correctly, it may prematurely signal the dryer to stop drying. To calibrate the moisture sensor, follow these steps:
- Place a damp towel in the dryer.
- Start a drying cycle on the “Timed Dry” setting for 20 minutes.
- After 20 minutes, check the towel. If it’s still damp, increase the drying time by 5-minute increments until the towel is dry.
- Once the towel is dry, reset the dryer by unplugging it for 30 seconds and then plugging it back in.
Contact Samsung Support
If you have tried all the above solutions and your Samsung dryer is still not keeping drying, it may be time to contact Samsung support. They can provide professional assistance and diagnose any underlying issues that require repair.
What You Need to Know
Why does my Samsung dryer keep shutting off?
- Overheating: Clogged lint screen, blocked vent system, or malfunctioning exhaust fan can cause overheating.
- Moisture sensor issue: Incorrect calibration or faulty sensor can prematurely signal the dryer to stop drying.
- Power supply problems: Loose power cord or faulty outlet can interrupt the power supply.
How do I reset my Samsung dryer?
- Unplug the dryer from the power outlet and wait for 30 seconds.
- Plug it back in and restart the drying cycle.
What should I do if my dryer is not heating?
- Check the power supply to ensure the dryer is receiving power.
- Clean the lint screen and inspect the vent system for any blockages.
- If the heating element is faulty, it may need to be replaced by a qualified technician.
