What To Know
- Monitors the temperature inside the drum and may malfunction, causing the dryer to stay in cooling mode.
- If you see an error code displayed on the dryer’s panel, consult the LG user manual or contact a qualified technician for further assistance.
- If your dryer is not heating at all, it may indicate a problem with the heating element, gas supply, or ignition system.
Are you stuck in a never-ending cycle of cooling mode in your LG dryer? Don’t fret! This comprehensive guide will provide you with step-by-step instructions on how to get your dryer back to its normal operating mode, leaving your clothes dry and fresh in no time.
Understanding Cooling Mode
The cooling mode in an LG dryer is designed to protect your clothes from excessive heat exposure. It automatically activates after the drying cycle is complete to cool down the drum and prevent wrinkles.
Troubleshooting Cooling Mode Issues
If your LG dryer remains in cooling mode indefinitely, it could indicate an issue with the following components:
- Temperature sensor: Monitors the temperature inside the drum and may malfunction, causing the dryer to stay in cooling mode.
- Control board: Receives signals from the temperature sensor and may fail to switch the dryer out of cooling mode.
- Wiring: Loose or damaged wiring can disrupt communication between the temperature sensor and control board.
Step-by-Step Guide to Deactivating Cooling Mode
1. Check the Door Switch
Ensure that the dryer door is closed properly. A faulty door switch can prevent the dryer from transitioning out of cooling mode.
2. Inspect the Temperature Sensor
Locate the temperature sensor inside the dryer drum. Check for any visible damage or loose connections. Replace the sensor if necessary.
3. Test the Control Board
Disconnect the dryer from the power source and remove the control board. Inspect the board for any burnt or damaged components. If necessary, replace the control board.
4. Examine the Wiring
Follow the wiring from the temperature sensor to the control board. Inspect for any loose connections or damage to the wires. Repair or replace any faulty wiring.
5. Reset the Dryer
Once you have checked the above components, reset the dryer by unplugging it for 10 minutes. This will clear any stored errors and potentially resolve the cooling mode issue.
6. Perform a Test Cycle
Plug the dryer back in and run a test cycle without any clothes. If the dryer operates normally, the problem is likely resolved.
Troubleshooting Advanced Issues
1. Error Code Display
If you see an error code displayed on the dryer’s panel, consult the LG user manual or contact a qualified technician for further assistance.
2. Dryer Not Heating
If your dryer is not heating at all, it may indicate a problem with the heating element, gas supply, or ignition system. Refer to the specific troubleshooting guide for your LG dryer model.
3. Dryer Overheating
If your dryer is overheating, immediately unplug it and contact a qualified technician. Overheating can be a safety hazard and should not be ignored.
Wrapping It Up: Regaining Dryer Proficiency
By following these steps, you can effectively troubleshoot and resolve cooling mode issues in your LG dryer, restoring it to its efficient and reliable operation. Remember, if the problem persists or you encounter advanced issues, do not hesitate to consult a qualified technician for professional assistance.
Questions We Hear a Lot
1. Why does my LG dryer keep going into cooling mode?
- Faulty temperature sensor, control board, or wiring
- Door switch malfunction
2. How can I prevent my dryer from overheating?
- Clean the lint filter regularly
- Ensure proper ventilation around the dryer
- Do not overload the dryer
3. What should I do if I see an error code on my LG dryer?
