What To Know
- A malfunctioning dryer can be a frustrating inconvenience, especially when it fails to heat up as expected.
- Ensure the dryer is set to a normal or higher temperature setting.
- Run a small load of dry towels on the normal setting to see if it heats up.
A malfunctioning dryer can be a frustrating inconvenience, especially when it fails to heat up as expected. If you’re facing this issue with your LG dryer, you’re not alone. This blog post aims to provide a comprehensive guide to help you troubleshoot and resolve the problem, answering the common question: “Why doesn’t my LG dryer heat on normal setting?”
Potential Causes and Solutions
1. Power Supply Issues
- Check the power cord: Ensure the power cord is securely plugged into both the wall outlet and the dryer.
- Inspect the fuse or circuit breaker: If the power cord is fine, check if the fuse or circuit breaker has tripped. Reset it if necessary.
- Test the outlet: Use a voltage tester to verify that the outlet is providing electricity.
2. Gas Supply Problems
- Check the gas connection: Make sure the gas line is properly connected to the dryer.
- Inspect the gas valve: Ensure the gas valve is open and allowing gas to flow.
- Clean the gas line: If the gas line is obstructed, it can restrict gas flow. Use a pipe cleaner to remove any debris.
3. Thermostat Malfunction
- Test the thermostat: Use a multimeter to check the continuity of the thermostat. If it’s faulty, replace it.
- Reset the thermostat: Sometimes, the thermostat can get stuck. Try resetting it by turning it off and then back on.
4. Heating Element Issues
- Inspect the heating element: Look for any signs of damage or corrosion. If it’s damaged, replace it.
- Check the connections: Ensure the heating element is properly connected to the power supply.
5. Fan Motor Problems
- Test the fan motor: Spin the fan blade manually. If it doesn’t move freely, the motor may be faulty.
- Inspect the fan belt: A loose or broken fan belt can prevent the fan from circulating air.
6. Moisture Sensor Malfunction
- Clean the moisture sensor: The moisture sensor can become clogged with lint. Clean it using a cotton swab or soft brush.
- Reset the moisture sensor: If cleaning doesn’t resolve the issue, try resetting the sensor by unplugging the dryer for 15 minutes.
7. Control Board Problems
- Reset the control board: Sometimes, the control board can malfunction. Try resetting it by unplugging the dryer for 15 minutes.
- Replace the control board: If resetting doesn’t work, the control board may need to be replaced.
Additional Tips
- Clean the lint filter: A clogged lint filter can restrict airflow and affect heating.
- Check the exhaust vent: Ensure the exhaust vent is clear of obstructions.
- Contact LG customer support: If you’re unable to resolve the issue yourself, contact LG customer support for professional assistance.
Troubleshooting the Normal Setting
If your LG dryer is not heating on the normal setting, follow these steps:
- Check the temperature setting: Ensure the dryer is set to a normal or higher temperature setting.
- Inspect the load size: Overloading the dryer can prevent it from heating effectively.
- Test the dryer with a smaller load: Run a small load of dry towels on the normal setting to see if it heats up.
The Last Resort: Replacing the Dryer
If all troubleshooting methods fail, it may be necessary to replace the dryer. Before doing so, consider the following:
- Age of the dryer: If the dryer is old, it may be more cost-effective to replace it.
- Repair costs: Compare the repair costs to the cost of a new dryer.
- Warranty status: Check if the dryer is still under warranty.
Common Questions and Answers
Why is my LG dryer not heating on any setting?
- Check the power supply, gas supply, and other potential causes listed above.
How do I reset my LG dryer?
- Unplug the dryer for 15 minutes and then plug it back in.
What is the most common cause of a LG dryer not heating?
- Clogged lint filter or exhaust vent.
How much does it cost to fix a LG dryer that is not heating?
- Repair costs vary depending on the cause of the problem. Contact LG customer support for an estimate.
What are the symptoms of a bad heating element in a LG dryer?
- Clothes are not getting dry or are taking longer to dry.
