What To Know
- Slide the new drain pipe onto the drain pipe connections on the pump and the drain hose.
- If the drain pipe is severely clogged, you may need to use a drain snake to clear the blockage before installing the new drain pipe.
- Changing the drain pipe on a Whirlpool washing machine is a relatively simple task that can be completed in a few hours.
A clogged drain pipe can be a major inconvenience, especially when it comes to your Whirlpool washing machine. Fortunately, changing the drain pipe is a relatively simple task that can be completed in a few hours. In this guide, we will provide you with step-by-step instructions on how to change a Whirlpool washing machine drain pipe.
Tools and Materials
Before you begin, gather the following tools and materials:
- New drain pipe
- Adjustable wrench
- Pliers
- Bucket
- Rags
- Screwdriver
Safety Precautions
Before working on your washing machine, unplug it from the electrical outlet. Also, turn off the water supply to the machine.
Step-by-Step Instructions
Step 1: Locate the Drain Pipe
The drain pipe is usually located at the back or bottom of the washing machine. It is typically made of rubber or plastic and is connected to the pump.
Step 2: Disconnect the Old Drain Pipe
Use an adjustable wrench to loosen the clamps that connect the drain pipe to the pump and the drain hose. Once the clamps are loose, pull the drain pipe off the connections.
Step 3: Clean the Drain Pipe Connections
Use a rag to clean any debris or dirt from the drain pipe connections on the pump and the drain hose. This will ensure a proper seal with the new drain pipe.
Step 4: Connect the New Drain Pipe
Slide the new drain pipe onto the drain pipe connections on the pump and the drain hose. Tighten the clamps using an adjustable wrench. Make sure the clamps are tight enough to prevent leaks, but not so tight that you damage the drain pipe.
Step 5: Test the Drain Pipe
Run a short wash cycle to test the new drain pipe. Check for any leaks around the drain pipe connections. If you notice any leaks, tighten the clamps further.
Additional Tips
- If you are unable to remove the old drain pipe by hand, use pliers to gently pry it off the connections.
- If the drain pipe is severely clogged, you may need to use a drain snake to clear the blockage before installing the new drain pipe.
- If you are not comfortable changing the drain pipe yourself, contact a qualified appliance repair technician.
Troubleshooting
- Leakage from the drain pipe connections: Check if the clamps are tight enough. If they are, the drain pipe may be damaged and need to be replaced.
- Water not draining properly: Make sure the drain hose is not kinked or blocked. If it is, straighten the hose or remove the blockage.
- Whirlpool washing machine not draining: Check if the pump is working properly. If it is not, the pump may need to be replaced.
Wrapping Up
Changing the drain pipe on a Whirlpool washing machine is a relatively simple task that can be completed in a few hours. By following the steps outlined in this guide, you can save yourself the cost of hiring a professional appliance repair technician.
