Tired of a flooded utility room? master the art of draining your kenmore washing machine now

Draining your Kenmore washing machine is a crucial maintenance task that ensures its optimal performance. Whether you’re experiencing a clogged drain or simply need to empty the water, understanding the correct draining procedure is essential. This comprehensive guide will provide you with step-by-step instructions on how to drain a Kenmore washing machine effectively.

Identifying the Drain Hose

Locate the drain hose, which is typically a gray or black hose at the back of the washing machine. It usually connects to a standpipe or drainpipe.

Unhooking the Drain Hose

Disconnect the drain hose from the standpipe or drainpipe. Place a bucket or shallow pan beneath the hose to catch the draining water.

Cleaning the Drain Hose

Inspect the drain hose for any clogs or debris. Use a flashlight to check for blockages inside the hose. If necessary, use a pair of pliers to carefully remove any obstructions.

Reattaching the Drain Hose

Once the drain hose is clean, reconnect it to the standpipe or drainpipe. Ensure that the hose is securely attached to prevent leaks.

Using the Drain Cycle

If your Kenmore washing machine has a dedicated drain cycle, select it. This cycle will automatically pump out the water from the machine.

Manually Draining the Machine

If your washing machine does not have a drain cycle, you can manually drain it using the following steps:

1. Locate the drain plug: It is usually a small, rubber plug located at the bottom of the front panel.
2. Remove the plug: Use a screwdriver or a coin to carefully remove the plug.
3. Drain the water: Allow the water to drain into the bucket or pan.
4. Replace the plug: Once the water has drained, replace the plug securely.

Cleaning the Drain Pump Filter

The drain pump filter may become clogged over time, preventing the machine from draining properly. To clean the filter:

1. Locate the filter: It is usually a small, round component located at the bottom of the washing machine.
2. Remove the filter: Unscrew or pull out the filter using pliers.
3. Clean the filter: Remove any debris or hair from the filter.
4. Replace the filter: Reinsert the filter and tighten it securely.

Resetting the Washing Machine

After draining the washing machine, it may be necessary to reset it. This will clear any error codes and restore the machine to its default settings. To reset the washing machine:

1. Unplug the machine: Disconnect the washing machine from the power outlet.
2. Wait 5 minutes: Allow the machine to sit unplugged for at least 5 minutes.
3. Replug the machine: Reconnect the washing machine to the power outlet.

Summary: Maintaining a Smooth-Running Kenmore Washing Machine

Regularly draining and maintaining your Kenmore washing machine will ensure its longevity and optimal performance. By following these steps, you can effectively drain your machine and prevent future clogs. Remember to check the drain hose, clean the drain pump filter, and reset the machine as needed.

What You Need to Learn

1. How often should I drain my Kenmore washing machine?

Drain your washing machine every 3-6 months, or as needed if you notice any drainage issues.

2. Can I use bleach to clean the drain hose?

Yes, you can use a diluted bleach solution to clean the drain hose. However, be sure to rinse the hose thoroughly with water afterward.

3. What should I do if the drain plug is stuck?

If the drain plug is stuck, try using a pair of pliers to gently wiggle it loose. If it still won’t budge, contact a professional appliance repair technician.

4. How do I know if the drain pump filter is clogged?

If your washing machine is not draining properly or making unusual noises, the drain pump filter may be clogged. Check the filter and clean it if necessary.

5. Can I drain my Kenmore washing machine without removing the drain hose?

Yes, you can manually drain the machine using the drain plug located at the bottom of the front panel.