Maytag washing machine drainage nightmare: why it won’t drain and how to fix it today!
What To Know
- One of the most common reasons for a Maytag washing machine to fail to drain is a faulty drain pump.
- Signs of a failed drain pump include a humming or buzzing noise during the drain cycle or water remaining in the tub after the cycle has finished.
- While it is possible to replace the drain pump yourself, it is advisable to contact a qualified technician if you are not comfortable working on appliances.
A malfunctioning washing machine that refuses to drain can be a frustrating and time-consuming inconvenience. If you’re facing this issue with your Maytag washing machine, you’re not alone. This comprehensive guide will delve into the potential causes and provide step-by-step solutions to help you troubleshoot and resolve the problem effectively.
Drain Pump Failure
One of the most common reasons for a Maytag washing machine to fail to drain is a faulty drain pump. This pump is responsible for expelling water from the washer during the drain cycle. If the pump is malfunctioning, it may not be able to generate enough pressure to push the water out. Signs of a failed drain pump include a humming or buzzing noise during the drain cycle or water remaining in the tub after the cycle has finished.
Clogged Drain Hose
Another potential culprit behind a clogged drain is a clogged drain hose. Over time, lint, hair, and other debris can accumulate in the drain hose, restricting water flow and preventing the washer from draining properly. Inspect the drain hose for any visible blockages and clean it thoroughly using a snake or a wet/dry vacuum.
Blocked Drainpipe
The drainpipe, which connects the drain hose to the main drain system, can also become clogged. This can occur due to a buildup of debris or a kink in the pipe. Disconnect the drain hose from the drainpipe and check for any obstructions. If necessary, use a drain snake or a plunger to clear the blockage.
Faulty Lid Switch
The lid switch is a safety feature that prevents the washing machine from operating when the lid is open. If the lid switch is malfunctioning, the washer may not be able to complete the drain cycle. Test the lid switch by closing the lid and pressing the start button. If the washer does not start, the lid switch may need to be replaced.
Clogged Drain Filter
Some Maytag washing machines have a drain filter that can trap lint and other debris. If the drain filter becomes clogged, it can restrict water flow and prevent the washer from draining properly. Locate the drain filter, usually at the bottom of the washer, and clean it by removing any accumulated debris.
Defective Motor Coupler
The motor coupler is a component that connects the motor to the transmission. If the motor coupler is damaged or worn, it may not be able to transfer power to the transmission, preventing the washer from draining. Inspect the motor coupler for any cracks or damage and replace it if necessary.
Faulty Control Board
In some cases, a faulty control board can cause the washing machine to malfunction, including preventing it from draining. The control board is responsible for managing the various functions of the washer, including the drain cycle. If the control board is malfunctioning, it may need to be replaced by a qualified technician.
Takeaways
Troubleshooting a Maytag washing machine that won’t drain can be a challenging task, but by following the steps outlined above, you can identify and resolve the issue effectively. If you are unable to resolve the problem on your own, do not hesitate to contact a qualified appliance repair technician for assistance.
Top Questions Asked
Q: Why does my Maytag washing machine make a humming noise when it’s draining?
A: A humming noise during the drain cycle may indicate a faulty drain pump.
Q: How often should I clean the drain filter in my Maytag washing machine?
A: It is recommended to clean the drain filter every 3-6 months to prevent clogging.
Q: Can I replace the drain pump in my Maytag washing machine myself?
A: While it is possible to replace the drain pump yourself, it is advisable to contact a qualified technician if you are not comfortable working on appliances.