What To Know
- If you notice a decrease in water flow or a change in the taste or smell of your water, it may be time to change the filter.
- If you are unable to loosen the housing cap using an adjustable wrench or channel locks, you may need to use a rubber strap wrench or a filter wrench.
- If the cap is tight, there may be a problem with the filter itself or another component of your filter system.
Maintaining the quality of your water is essential for your health and well-being. Pelican carbon filters are highly effective in removing contaminants from your water, but they need to be replaced regularly to ensure optimal performance. In this comprehensive guide, we will provide you with step-by-step instructions on how to change your Pelican carbon filter, ensuring that you have access to clean and healthy water.
Materials You’ll Need
- New Pelican carbon filter
- Adjustable wrench or channel locks
- Bucket or bowl
- Clean cloths or towels
Safety Precautions
Before you begin, ensure that you take the following safety precautions:
- Shut off the water supply to your filter system.
- Wear gloves to protect your hands from any contaminants.
- If necessary, place a bucket or bowl under the filter to catch any water that may spill.
Step-by-Step Instructions
1. Locate and Identify the Filter Housing
Locate the Pelican carbon filter housing. It is typically a blue or white canister that is connected to your water line.
2. Use an Adjustable Wrench or Channel Locks
Use an adjustable wrench or channel locks to loosen the housing cap. Turn the cap counterclockwise until it is loose enough to remove by hand.
3. Remove the Old Filter
Once the cap is removed, carefully remove the old carbon filter. It may be slightly wet, so be prepared for some water to drain out.
4. Inspect the Housing
Inspect the inside of the housing for any debris or sediment. If necessary, use a clean cloth or towel to wipe away any buildup.
5. Insert the New Filter
Take the new carbon filter and insert it into the housing. Ensure that it is placed correctly, with the arrow on the filter pointing towards the outlet.
6. Tighten the Housing Cap
Hand-tighten the housing cap onto the housing. Use the adjustable wrench or channel locks to further tighten the cap until it is snug. Do not overtighten.
7. Turn on the Water Supply
Turn on the water supply to your filter system. Check for any leaks around the housing cap. If you notice any leaks, tighten the cap further.
Additional Tips
- It is recommended to change your Pelican carbon filter every 6-12 months, depending on your water usage and the quality of your water.
- If your water has a high sediment content, you may need to change the filter more frequently.
- If you notice a decrease in water flow or a change in the taste or smell of your water, it may be time to change the filter.
- Always use genuine Pelican carbon filters to ensure optimal performance and longevity.
Troubleshooting
- I cannot loosen the housing cap: If you are unable to loosen the housing cap using an adjustable wrench or channel locks, you may need to use a rubber strap wrench or a filter wrench.
- Water is leaking from the housing cap: If water is leaking from the housing cap, it may be due to a damaged O-ring. Replace the O-ring with a new one.
- I am not getting any water flow: If you are not getting any water flow after changing the filter, check the housing cap to ensure it is properly tightened. If the cap is tight, there may be a problem with the filter itself or another component of your filter system.
Replacing a Pelican Under-Sink Carbon Filter
If you have a Pelican under-sink carbon filter, the replacement process is slightly different.
1. Shut off the Water Supply
Turn off the cold water supply valve under your sink.
2. Disconnect the Water Lines
Use a wrench to disconnect the water lines from the filter head.
3. Remove the Filter Head
Use a wrench to loosen the filter head and remove it from the mounting bracket.
4. Replace the Filter
Remove the old carbon filter and insert the new one into the filter head.
5. Reinstall the Filter Head
Hand-tighten the filter head onto the mounting bracket. Use a wrench to further tighten the head until it is snug.
6. Reconnect the Water Lines
Reconnect the water lines to the filter head and tighten them securely.
7. Turn on the Water Supply
Turn on the cold water supply valve and check for leaks.
What People Want to Know
Q: How often should I change my Pelican carbon filter?
A: It is recommended to change your Pelican carbon filter every 6-12 months, depending on your water usage and the quality of your water.
Q: What are the signs that my Pelican carbon filter needs to be replaced?
A: Signs that your Pelican carbon filter needs to be replaced include decreased water flow, a change in the taste or smell of your water, or if it has been more than 6-12 months since your last filter change.
Q: Can I use a different brand of carbon filter in my Pelican filter system?
A: It is not recommended to use a different brand of carbon filter in your Pelican filter system. Pelican carbon filters are designed specifically for Pelican filter systems and using a different brand may compromise the performance and longevity of your system.
