What To Know
- Ensure the dishwasher is plugged in and that the circuit breaker or fuse is not tripped.
- Make sure the dishwasher door is fully closed and the latch is engaged.
- The condensation sensor detects the level of moisture in the dishwasher.
If your Asko dishwasher is acting up, don’t panic! This comprehensive guide will walk you through the most common problems and provide step-by-step instructions on how to fix them.
Common Problems and Solutions
1. Dishwasher Doesn’t Start
- Check power supply: Ensure the dishwasher is plugged in and that the circuit breaker or fuse is not tripped.
- Check door latch: Make sure the dishwasher door is fully closed and the latch is engaged.
- Reset the dishwasher: Unplug the dishwasher for 30 seconds and then plug it back in. This will reset the control panel.
2. Dishwasher Doesn’t Fill with Water
- Check water supply: Verify that the water supply valve is turned on and that there is adequate water pressure.
- Clean the inlet valve screen: The inlet valve screen can become clogged with debris, preventing water from entering the dishwasher. Remove the screen and clean it with a soft brush.
- Replace the inlet valve: If the inlet valve is faulty, it will need to be replaced.
3. Dishwasher Doesn’t Drain
- Check the drain hose: Ensure that the drain hose is not kinked or clogged.
- Clean the drain pump: The drain pump can become clogged with food particles. Remove the drain pump and clean it with a soft brush.
- Replace the drain pump: If the drain pump is faulty, it will need to be replaced.
4. Dishwasher Doesn’t Clean Dishes
- Check the spray arms: The spray arms can become clogged with food particles. Remove the spray arms and clean them with a soft brush.
- Clean the filters: The dishwasher filters can become clogged with food particles and debris. Remove the filters and clean them with a soft brush.
- Use the correct detergent: Ensure you are using a detergent specifically designed for dishwashers.
5. Dishwasher Makes Noise
- Check the drain pump: A faulty drain pump can make grinding or humming noises.
- Check the spray arms: Loose or damaged spray arms can rattle or vibrate during the wash cycle.
- Lubricate the door hinges: Squeaky door hinges can cause noise during the opening and closing of the dishwasher.
6. Dishwasher Leaks
- Check the door gasket: A damaged or worn door gasket can allow water to leak out of the dishwasher.
- Tighten the drain hose connection: A loose drain hose connection can cause water to leak during the drain cycle.
- Replace the water inlet valve: A faulty water inlet valve can cause water to leak into the dishwasher.
7. Dishwasher Display Error Codes
- E1: Inlet valve fault
- E2: Drain pump fault
- E3: Heating element fault
- E4: Temperature sensor fault
- E5: Control panel fault
If you encounter any of these error codes, consult the dishwasher’s user manual for specific troubleshooting instructions.
Advanced Troubleshooting
1. Dishwasher Doesn’t Heat Water
- Check the heating element: The heating element can become damaged or faulty. Use a multimeter to test the heating element for continuity.
- Replace the control board: The control board can malfunction and prevent the dishwasher from heating water.
2. Dishwasher Doesn’t Dry Dishes
- Check the vent: The vent allows moisture to escape from the dishwasher. Ensure the vent is not blocked or clogged.
- Clean the condensation sensor: The condensation sensor detects the level of moisture in the dishwasher. If the sensor is dirty, it can prevent the dishwasher from drying dishes.
Final Thoughts: Troubleshooting Success
By following these troubleshooting tips, you can diagnose and fix most common problems with your Asko dishwasher. If you encounter more complex issues or are unable to resolve the problem yourself, contact a qualified appliance repair technician.
Frequently Asked Questions
Q: Why is my Asko dishwasher not cleaning my dishes?
A: Check the spray arms, filters, and detergent to ensure they are clean and functioning properly.
Q: What does the E3 error code mean on my Asko dishwasher?
A: The E3 error code indicates a heating element fault.
Q: How do I reset my Asko dishwasher?
A: Unplug the dishwasher for 30 seconds and then plug it back in.
