Mid-cycle dishwasher interruptions can be frustrating, especially when you have a busy schedule. If you need to stop your Asko dishwasher during a wash cycle, follow these steps:
Open the Dishwasher Door
Caution: Steam and hot water may escape when you open the door. Stand back and open the door slowly.
Press the “Start/Cancel” Button
Locate the “Start/Cancel” button on the dishwasher’s control panel. Press and hold the button for a few seconds until the cycle stops.
Close the Dishwasher Door
Once the cycle has stopped, close the dishwasher door to prevent water or steam from escaping.
Additional Tips
- Check the water supply: Ensure that the water supply is turned on and that the hose is not kinked or blocked.
- Unplug the dishwasher: If the “Start/Cancel” button doesn’t stop the cycle, unplug the dishwasher from the power outlet. Wait a few minutes and then plug it back in.
- Reset the dishwasher: Locate the reset button, usually hidden behind the lower kickplate. Press and hold the reset button for 3-5 seconds to reset the dishwasher.
Safety Precautions
- Never reach into the dishwasher while it is running: This could result in serious injury.
- Use caution when opening the door during a cycle: Steam and hot water can escape and cause burns or scalds.
- If the dishwasher is leaking or sparking, unplug it immediately and contact a qualified technician.
Troubleshooting Common Issues
Dishwasher Won’t Stop Running
- Check the door latch: Ensure that the door is properly closed and that the latch is engaged.
- Reset the dishwasher: Follow the steps outlined above to reset the dishwasher.
- Contact a technician: If the problem persists, contact an authorized Asko dishwasher repair technician.
Dishwasher Stops and Won’t Resume
- Check the power supply: Ensure that the dishwasher is plugged in and receiving power.
- Check the water supply: Verify that the water supply is turned on and that the hose is not kinked or blocked.
- Reset the dishwasher: Follow the steps outlined above to reset the dishwasher.
Dishwasher Continues to Drain
- Check the drain hose: Ensure that the drain hose is not kinked or blocked.
- Check the drain pump: If the drain pump is faulty, it may cause the dishwasher to continue draining. Contact a technician for repair.
- Reset the dishwasher: Follow the steps outlined above to reset the dishwasher.
Frequently Asked Questions
Q: Can I open the dishwasher door during a cycle without damaging it?
A: Yes, you can open the door during a cycle, but be cautious of escaping steam and hot water.
Q: What should I do if my dishwasher stops running mid-cycle?
A: Check the door latch, reset the dishwasher, or contact a technician if the problem persists.
Q: How do I reset my Asko dishwasher?
A: Locate the reset button behind the lower kickplate and press and hold it for 3-5 seconds.
