Is your Samsung dishwasher refusing to drain? Don’t worry, you’re not alone. This common issue can be frustrating, but it’s usually easy to fix with a little troubleshooting. Here’s a comprehensive guide on how to get your Samsung dishwasher to drain properly:
1. Check the Drain Hose
The first step is to check the drain hose. Make sure it’s not kinked, clogged, or disconnected. If the hose is kinked, straighten it out. If it’s clogged, you can try using a drain snake to clear it. If the hose is disconnected, reconnect it securely.
2. Clean the Drain Filter
The drain filter is another common culprit when it comes to drainage issues. To clean the filter, locate it at the bottom of the dishwasher tub. Unscrew the filter cap and remove the filter. Rinse the filter with hot water and replace it.
3. Check the Air Gap
The air gap is a small device that prevents water from siphoning back into the dishwasher. If the air gap is clogged, it can prevent the dishwasher from draining properly. To check the air gap, locate it on the countertop near the sink. Remove the cap and clean the inside with a toothpick or a small brush.
4. Check the Drain Pump
The drain pump is responsible for pumping the water out of the dishwasher. If the drain pump is faulty, it can prevent the dishwasher from draining properly. To check the drain pump, locate it at the bottom of the dishwasher tub. Remove the drain pump cap and check for any obstructions. If the drain pump is clogged, you can try using a drain snake to clear it.
5. Reset the Dishwasher
Sometimes, a simple reset can fix a drainage issue. To reset the dishwasher, unplug it from the power outlet and wait for 30 seconds. Then, plug the dishwasher back in and start a new cycle.
6. Call a Technician
If you’ve tried all of the above steps and your dishwasher is still not draining, it’s time to call a technician. A qualified technician will be able to diagnose the problem and repair it quickly.
Wrap Up: Draining Your Samsung Dishwasher
By following these steps, you should be able to get your Samsung dishwasher draining properly again. If you’re still having trouble, don’t hesitate to call a technician for help.
What You Need to Know
Q: Why is my Samsung dishwasher not draining?
A: There are several reasons why your Samsung dishwasher may not be draining, including a kinked or clogged drain hose, a dirty drain filter, a clogged air gap, a faulty drain pump, or a software issue.
Q: How do I clean the drain filter in my Samsung dishwasher?
A: To clean the drain filter, locate it at the bottom of the dishwasher tub. Unscrew the filter cap and remove the filter. Rinse the filter with hot water and replace it.
Q: How do I reset my Samsung dishwasher?
A: To reset your Samsung dishwasher, unplug it from the power outlet and wait for 30 seconds. Then, plug the dishwasher back in and start a new cycle.
