Installing a Frigidaire dishwasher side mount kit is a practical solution to maximize your dishwasher’s efficiency and streamline your kitchen workflow. This comprehensive guide will provide you with step-by-step instructions to ensure a successful installation.
Tools and Materials Required
- Frigidaire dishwasher side mount kit
- Screwdriver
- Drill
- Measuring tape
- Level
Step-by-Step Installation Guide
1. Prepare the Dishwasher
- Remove the existing dishwasher from its cabinet.
- Place the dishwasher on a stable surface, such as a countertop or rolling cart.
2. Attach the Side Mount Brackets
- Position the side mount brackets on the sides of the dishwasher.
- Secure the brackets using the provided screws.
- Ensure that the brackets are level and properly aligned.
3. Install the Side Mount Kit
- Slide the side mount kit onto the brackets.
- Tighten the screws to secure the kit in place.
- Check the kit’s stability by gently pushing and pulling on it.
4. Reposition the Dishwasher
- Carefully lift the dishwasher back into its cabinet.
- Maneuver the dishwasher until it fits snugly into the opening.
5. Secure the Dishwasher
- Use the provided screws to secure the dishwasher to the cabinet.
- Tighten the screws firmly to prevent the dishwasher from moving.
6. Connect the Water Supply
- Attach the water supply line to the dishwasher’s inlet valve.
- Turn on the water supply and check for leaks.
7. Connect the Drain Hose
- Connect the drain hose to the dishwasher’s drain outlet.
- Secure the drain hose using a hose clamp.
Final Checks
- Run the dishwasher through a short cycle to ensure it is functioning properly.
- Check for any leaks or unusual noises.
- Adjust the dishwasher’s feet if necessary to ensure it is level.
Tips for a Successful Installation
- Measure the dishwasher and cabinet opening carefully to ensure a proper fit.
- Use a level to ensure that the side mount brackets are installed evenly.
- Tighten all screws firmly to prevent leaks and ensure stability.
- Test the dishwasher thoroughly before putting it into regular use.
Troubleshooting Common Issues
- Leak from the side mount kit: Check the tightness of the screws and the integrity of the gasket.
- Dishwasher not draining properly: Ensure that the drain hose is properly connected and not kinked.
- Dishwasher not filling with water: Inspect the water supply line for leaks or blockages.
What You Need to Learn
Q: Can I install the side mount kit myself?
A: Yes, with the right tools and some basic DIY skills, you can install the kit yourself.
Q: How much time does it take to install the side mount kit?
A: The installation time can vary depending on your experience and the complexity of your dishwasher model. Typically, it takes around 1-2 hours.
Q: What are the benefits of using a Frigidaire dishwasher side mount kit?
A: The side mount kit provides additional stability and support for the dishwasher, reduces noise, and improves accessibility to the dishwasher’s controls.
