Stop paying for repairs! learn how to replace your frigidaire dishwasher control board today
If your Frigidaire dishwasher is experiencing any of the following issues, it may be time to replace the control board:
- Dishwasher won’t start or cycle: If the dishwasher fails to respond when you press the start button, or if it stops mid-cycle, the control board may be faulty.
- Incorrect water temperature: The control board regulates the water temperature, so if your dishes are coming out too hot or too cold, the board may need to be replaced.
- Leaking dishwasher: A malfunctioning control board can lead to incorrect water valve operation, resulting in leaks.
- Display issues: If the dishwasher’s display is blank, dim, or displaying error codes, the control board may be the culprit.
- Strange noises: Unusual noises, such as buzzing or humming, may indicate a problem with the control board.
Tools and Materials You’ll Need
- Replacement Frigidaire dishwasher control board
- Screwdriver (Phillips head and flathead)
- Multimeter (optional)
Safety Precautions
- Unplug the dishwasher from the power outlet.
- Turn off the water supply to the dishwasher.
Step-by-Step Guide to Replacing the Frigidaire Dishwasher Control Board
1. Remove the Dishwasher Door Panel
- Open the dishwasher door and locate the two screws at the top corners of the door panel.
- Remove the screws and gently pull the door panel forward to detach it.
2. Disconnect the Wire Harness
- Locate the wire harness connected to the control board.
- Use a screwdriver to gently pry the wire harness loose from the board.
3. Remove the Old Control Board
- Locate the four screws holding the control board in place.
- Remove the screws and carefully lift the old control board out of the dishwasher.
4. Inspect the Wires
- Before installing the new control board, inspect the wires for any damage or corrosion.
- If any wires need to be replaced, do so before proceeding.
5. Install the New Control Board
- Place the new control board in the designated space and align it with the mounting holes.
- Secure the board with the four screws.
6. Reconnect the Wire Harness
- Plug the wire harness back into the control board.
- Ensure that the connection is secure.
7. Reattach the Door Panel
- Position the door panel back on the dishwasher and align the screw holes.
- Insert the two screws and tighten them securely.
8. Test the Dishwasher
- Plug the dishwasher back into the power outlet.
- Turn on the water supply and start a test cycle.
- Observe the dishwasher’s operation to ensure that it is functioning properly.
Troubleshooting Tips
- Dishwasher still won’t start: Check the power supply and ensure that the dishwasher is properly connected to the electrical outlet.
- Erratic dishwasher behavior: If the dishwasher is behaving erratically after replacing the control board, try resetting the dishwasher by unplugging it and plugging it back in.
- Error codes: If the dishwasher is displaying error codes, refer to the user manual for troubleshooting instructions.
Key Points: Restoring Your Frigidaire Dishwasher to Optimal Performance
Replacing the control board in your Frigidaire dishwasher is a relatively straightforward task that can restore your appliance to optimal performance. By following the steps outlined in this guide, you can save time and money while ensuring that your dishwasher operates reliably for years to come.
What You Need to Know
Q: How can I diagnose a faulty control board?
A: Look for symptoms such as a dishwasher that won’t start, incorrect water temperature, leaks, display issues, or strange noises.
Q: Is it difficult to replace the control board myself?
A: No, replacing the control board is a fairly easy task that can be completed with basic tools and the steps outlined in this guide.
Q: Where can I find a replacement control board for my Frigidaire dishwasher?
A: You can purchase a replacement control board from appliance parts stores, online retailers, or authorized Frigidaire repair centers.