What To Know
- There are several reasons why an LG dishwasher may not drain properly, including a clogged drain hose, a dirty drain filter, a faulty drain pump, or a clogged air gap.
- To clean the drain filter, remove it from the bottom of the dishwasher and rinse it with warm water and a mild detergent.
- To replace the drain pump, unplug the dishwasher, turn off the water supply, remove the lower access panel, locate the drain pump, disconnect the wires and hoses, remove the old drain pump, and install the new one.
Dishwashers are a modern convenience that can make our lives easier, but when they stop draining, it can be a major headache. If you have an LG dishwasher that won’t drain, don’t panic. This blog post will provide you with a step-by-step guide on how to troubleshoot and fix the issue.
Identifying the Problem
Before you start any repairs, it’s important to identify the source of the problem. Here are some common signs that your LG dishwasher is not draining properly:
- Standing water in the bottom of the dishwasher
- Dishes are not getting clean
- Dishwasher is making loud noises
- Dishwasher smells musty
Troubleshooting and Repair
1. Check the Drain Hose
The drain hose is responsible for carrying water away from the dishwasher. If it is kinked or clogged, it can prevent the dishwasher from draining properly. Inspect the drain hose for any visible damage or blockages. If you find a blockage, use a pair of pliers to gently remove it.
2. Clean the Drain Filter
The drain filter is located at the bottom of the dishwasher and traps food particles and other debris. Over time, the filter can become clogged and prevent the dishwasher from draining. Remove the drain filter and clean it with warm water and a mild detergent.
3. Inspect the Drain Pump
The drain pump is responsible for pumping water out of the dishwasher. If the drain pump is faulty, it can prevent the dishwasher from draining properly. To inspect the drain pump, remove the lower access panel of the dishwasher and look for any signs of damage or wear.
4. Replace the Drain Pump
If you find that the drain pump is faulty, you will need to replace it. To replace the drain pump, follow these steps:
1. Unplug the dishwasher from the power outlet.
2. Turn off the water supply to the dishwasher.
3. Remove the lower access panel of the dishwasher.
4. Locate the drain pump and disconnect the wires and hoses.
5. Remove the old drain pump and install the new one.
6. Reconnect the wires and hoses to the new drain pump.
7. Turn on the water supply to the dishwasher.
8. Plug the dishwasher into the power outlet.
5. Check the Air Gap
The air gap is a small device that prevents water from flowing back into the dishwasher. If the air gap is clogged, it can prevent the dishwasher from draining properly. To clean the air gap, remove the cap and use a toothpick or small brush to clean out any debris.
6. Reset the Dishwasher
Sometimes, a simple reset can fix a dishwasher that is not draining properly. To reset the dishwasher, follow these steps:
1. Unplug the dishwasher from the power outlet.
2. Wait for 60 seconds.
3. Plug the dishwasher back into the power outlet.
4. Start a wash cycle.
Summary: Troubleshooting Success
By following the steps outlined in this guide, you should be able to fix your LG dishwasher that won’t drain. If you are still having problems, you may need to call a qualified appliance repair technician.
What People Want to Know
Q: Why is my LG dishwasher not draining properly?
A: There are several reasons why an LG dishwasher may not drain properly, including a clogged drain hose, a dirty drain filter, a faulty drain pump, or a clogged air gap.
Q: How do I clean the drain filter in my LG dishwasher?
A: To clean the drain filter, remove it from the bottom of the dishwasher and rinse it with warm water and a mild detergent.
Q: How do I replace the drain pump in my LG dishwasher?
A: To replace the drain pump, unplug the dishwasher, turn off the water supply, remove the lower access panel, locate the drain pump, disconnect the wires and hoses, remove the old drain pump, and install the new one.
