What To Know
- The first step in resetting your LG dishwasher is to unplug it from the power outlet.
- Press and hold the reset button for 3-5 seconds until the control panel lights flash or a beep sounds.
- The control panel lights should flash or a beep should sound, indicating that the dishwasher has been reset.
If your LG dishwasher has been acting up, a reset might be just what the doctor ordered. Resetting your dishwasher can help resolve common issues like error codes, unresponsive buttons, or poor cleaning performance. In this comprehensive guide, we’ll walk you through the step-by-step process of how to reset your LG dishwasher.
Unplug and Replug
The first step in resetting your LG dishwasher is to unplug it from the power outlet. Wait for a few minutes, then plug it back in. This simple action can often resolve minor glitches and restore normal operation.
Use the Reset Button
Many LG dishwashers are equipped with a dedicated reset button. It’s typically located on the front or top panel of the dishwasher. Press and hold the reset button for 3-5 seconds until the control panel lights flash or a beep sounds.
Reset via the Control Panel
If your dishwasher doesn‘t have a physical reset button, you can reset it using the control panel. Here’s how:
1. Open the dishwasher door.
2. Press and hold the “Start/Pause” button for 5-10 seconds.
3. The control panel lights should flash or a beep should sound, indicating that the dishwasher has been reset.
Perform a Factory Reset
If the above methods don‘t resolve the issue, you can perform a factory reset. This will restore the dishwasher to its default settings.
1. Unplug the dishwasher.
2. Hold down the “Start/Pause” and “Cancel/Drain” buttons simultaneously.
3. While holding these buttons, plug the dishwasher back in.
4. Continue holding the buttons for 5-10 seconds.
5. The control panel lights should flash or a beep should sound, indicating that the factory reset has been completed.
Reset Using the Diagnostic Mode
Some LG dishwashers have a diagnostic mode that can be used to reset the dishwasher. Here’s how:
1. Open the dishwasher door.
2. Press and hold the “Start/Pause” button and the “Cycle Selection” button simultaneously.
3. Release the “Cycle Selection” button and immediately press it again.
4. The control panel lights should flash, indicating that the dishwasher has entered diagnostic mode.
5. Press the “Cycle Selection” button repeatedly until “88” appears on the display.
6. Press the “Start/Pause” button to confirm the factory reset.
Reset for Specific Error Codes
Certain error codes may require a specific reset procedure:
- OE (Overfill Error): Open the door and wait for the water to drain. Close the door and press the “Start/Pause” button.
- IE (Inlet Error): Check the water supply to the dishwasher. Open the door and press the “Start/Pause” button.
- HE (Heating Error): Unplug the dishwasher and wait for 30 minutes. Plug it back in and press the “Start/Pause” button.
The Bottom Line: Troubleshooting Dishwasher Woes
Resetting your LG dishwasher is a quick and effective way to resolve common issues. By following these simple steps, you can restore your dishwasher to its pristine condition and enjoy sparkling clean dishes once again.
Information You Need to Know
Q: Why does my LG dishwasher need to be reset?
A: A reset can resolve various issues, such as unresponsive buttons, error codes, or poor cleaning performance.
Q: How often should I reset my LG dishwasher?
A: Regular resets are not necessary. Only reset the dishwasher if you encounter problems.
Q: Will resetting my LG dishwasher erase my saved settings?
A: A factory reset will erase saved settings, while other reset methods typically do not.
Q: What if my LG dishwasher doesn‘t respond to the reset procedure?
A: Contact LG customer support or a qualified appliance repair technician.
Q: Can I reset my LG dishwasher without unplugging it?
A: Some reset methods do not require unplugging, but the unplug-and-replug method is generally more effective.
