What To Know
- In this blog post, we will explore the most common reasons why an LG dishwasher might trip the breaker and provide step-by-step instructions on how to troubleshoot and fix the problem.
- A leaking water inlet valve can allow water to enter the dishwasher even when it is not in use, which can lead to the dishwasher overflowing and tripping the breaker.
- The control board is the brains of the dishwasher, and a faulty control board can cause the dishwasher to malfunction in a variety of ways, including tripping the breaker.
If your LG dishwasher has been tripping the breaker, you’re not alone. This is a common issue that can be caused by a variety of factors. In this blog post, we will explore the most common reasons why an LG dishwasher might trip the breaker and provide step-by-step instructions on how to troubleshoot and fix the problem.
Possible Causes and Solutions
1. Overloaded Dishwasher
Overloading your dishwasher can put a strain on the motor, causing it to overheat and trip the breaker. Make sure to only load the dishwasher with the recommended number of dishes and avoid overloading the racks.
2. Clogged Drain Hose
A clogged drain hose can prevent water from draining properly from the dishwasher, which can lead to the dishwasher overflowing and tripping the breaker. Check the drain hose for any kinks or clogs and clean it out if necessary.
3. Faulty Door Latch
A faulty door latch can prevent the dishwasher from sealing properly, which can allow water to leak out and trip the breaker. Inspect the door latch for any damage or loose connections and replace it if necessary.
4. Leaking Water Inlet Valve
A leaking water inlet valve can allow water to enter the dishwasher even when it is not in use, which can lead to the dishwasher overflowing and tripping the breaker. Check the water inlet valve for any leaks and replace it if necessary.
5. Overheating Motor
An overheating motor can cause the dishwasher to trip the breaker. This can be caused by a variety of factors, such as a faulty capacitor or a worn-out motor. If you suspect that the motor is overheating, call a qualified appliance repair technician to diagnose and fix the problem.
6. Electrical Fault
An electrical fault in the dishwasher can cause the breaker to trip. This could be caused by a faulty wire, a loose connection, or a damaged circuit board. If you suspect an electrical fault, call a qualified electrician to diagnose and fix the problem.
7. Faulty Control Board
The control board is the brains of the dishwasher, and a faulty control board can cause the dishwasher to malfunction in a variety of ways, including tripping the breaker. If you suspect that the control board is faulty, call a qualified appliance repair technician to diagnose and fix the problem.
Troubleshooting Steps
If your LG dishwasher is tripping the breaker, you can follow these steps to troubleshoot the problem:
1. Check the dishwasher for any obvious problems, such as a clogged drain hose or a faulty door latch.
2. If you can’t find any obvious problems, unplug the dishwasher and wait 30 minutes. This will allow the dishwasher to reset.
3. Plug the dishwasher back in and try running it again. If the dishwasher still trips the breaker, call a qualified appliance repair technician.
Prevention Tips
There are a few things you can do to prevent your LG dishwasher from tripping the breaker:
- Only load the dishwasher with the recommended number of dishes.
- Avoid overloading the racks.
- Clean the drain hose regularly.
- Inspect the door latch for any damage or loose connections.
- Call a qualified appliance repair technician to service the dishwasher regularly.
In a nutshell: Troubleshooting LG Dishwasher Breaker Tripping
Tripping the breaker is a common issue with LG dishwashers, but it can be easily fixed by following the steps outlined in this blog post. If you are unable to fix the problem yourself, call a qualified appliance repair technician for assistance.
Frequently Asked Questions
Why does my LG dishwasher keep tripping the breaker when I wash dishes?
There are several reasons why your LG dishwasher may keep tripping the breaker when you wash dishes. Some of the most common causes include:
- Overloaded dishwasher
- Clogged drain hose
- Faulty door latch
- Leaking water inlet valve
- Overheating motor
- Electrical fault
- Faulty control board
What can I do to prevent my LG dishwasher from tripping the breaker?
There are a few things you can do to prevent your LG dishwasher from tripping the breaker:
- Only load the dishwasher with the recommended number of dishes.
- Avoid overloading the racks.
- Clean the drain hose regularly.
- Inspect the door latch for any damage or loose connections.
- Call a qualified appliance repair technician to service the dishwasher regularly.
How do I reset my LG dishwasher?
To reset your LG dishwasher, follow these steps:
1. Unplug the dishwasher from the power outlet.
2. Wait 30 minutes.
3. Plug the dishwasher back into the power outlet.
4. Press the “Start” button to reset the dishwasher.
