What To Know
- Replacing a KitchenAid dishwasher diverter motor may seem like a daunting task, but with the right tools and instructions, it can be done in a matter of hours.
- This blog post will provide you with a step-by-step guide on how to replace the diverter motor in your KitchenAid dishwasher.
- Use a socket wrench to remove the bolts holding the diverter motor in place.
Replacing a KitchenAid dishwasher diverter motor may seem like a daunting task, but with the right tools and instructions, it can be done in a matter of hours. This blog post will provide you with a step-by-step guide on how to replace the diverter motor in your KitchenAid dishwasher.
Tools You’ll Need
Before you start, gather the following tools:
- Phillips screwdriver
- Flathead screwdriver
- Socket wrench
- Pliers
- New diverter motor
Safety First
Before you begin, unplug the dishwasher from the power outlet and turn off the water supply.
Step 1: Remove the Dishwasher Door
Open the dishwasher door and locate the two screws holding the door in place. Remove the screws and carefully lift the door off the hinges.
Step 2: Remove the Front Panel
Locate the screws holding the front panel in place. Remove the screws and gently pull the front panel towards you.
Step 3: Disconnect the Wires
Locate the wires connected to the diverter motor. Use a flathead screwdriver to carefully disconnect the wires.
Step 4: Remove the Old Diverter Motor
Use a socket wrench to remove the bolts holding the diverter motor in place. Carefully pull the diverter motor out of the dishwasher.
Step 5: Install the New Diverter Motor
Align the new diverter motor with the mounting holes and insert the bolts. Tighten the bolts using a socket wrench.
Step 6: Reconnect the Wires
Connect the wires to the new diverter motor. Use a flathead screwdriver to securely tighten the wire connections.
Step 7: Reinstall the Front Panel
Align the front panel with the dishwasher and gently push it into place. Secure the front panel with the screws you removed earlier.
Step 8: Reinstall the Dishwasher Door
Align the dishwasher door with the hinges and carefully lift it into place. Secure the door with the screws you removed earlier.
Step 9: Test the Dishwasher
Plug the dishwasher back into the power outlet and turn on the water supply. Run a short cycle to test the new diverter motor.
Tips for Success
- Make sure to purchase the correct diverter motor for your specific KitchenAid dishwasher model.
- If you are not comfortable replacing the diverter motor yourself, contact a qualified appliance repair technician.
- Keep all wires and connections organized to avoid confusion.
Troubleshooting
If you encounter any problems while replacing the diverter motor, try the following:
- Check if the wires are securely connected.
- Make sure the new diverter motor is properly seated in the dishwasher.
- If the dishwasher still does not work after replacing the diverter motor, contact a qualified appliance repair technician.
Popular Questions
Q: How long does it take to replace a KitchenAid dishwasher diverter motor?
A: With the right tools and instructions, it should take approximately 1-2 hours to replace the diverter motor.
Q: Can I replace the diverter motor myself?
A: Yes, you can replace the diverter motor yourself if you are comfortable working with electrical appliances. However, if you are not confident, it is recommended to contact a qualified appliance repair technician.
Q: What are the signs that my KitchenAid dishwasher diverter motor needs to be replaced?
A: Some signs that your KitchenAid dishwasher diverter motor needs to be replaced include:
- The dishwasher is not draining properly.
- The dishwasher is making a loud noise during the wash cycle.
- The dishwasher is not filling with water.
