Unveiling the secrets: why your kitchenaid dishwasher’s clean light is winking at you

If your KitchenAid dishwasher‘s clean light is blinking, it’s a sign that something is amiss. This guide will delve into the potential causes behind this blinking light, empowering you to diagnose and resolve the issue efficiently.

1. Incomplete Cycle

• Cause: The dishwasher cycle may not have completed successfully due to a power outage, a door that was opened during the cycle, or a faulty door latch.
• Solution: Reset the dishwasher by pressing the “Cancel” or “Reset” button. Restart the cycle and ensure that the door is securely closed.

2. Clogged Filter

• Cause: A clogged filter can prevent dirty water from draining properly, causing the clean light to blink.
• Solution: Remove the filter and clean it thoroughly with warm water and a soft brush. Reinstall the filter securely.

3. Drain Hose Kink

• Cause: A kinked drain hose can obstruct the flow of water, leading to the blinking clean light.
• Solution: Unkink the drain hose and ensure that it is not crushed or blocked.

4. Faulty Water Inlet Valve

• Cause: A faulty water inlet valve may not allow water to enter the dishwasher, preventing the cycle from completing.
• Solution: Replace the water inlet valve. This task may require professional assistance.

5. Overfilled Dishwasher

• Cause: Overfilling the dishwasher can prevent the dishes from cleaning properly and may cause the clean light to blink.
• Solution: Remove some dishes from the dishwasher and restart the cycle.

6. Incorrect Detergent Dosage

• Cause: Using too much or too little detergent can affect the cleaning process and trigger the blinking clean light.
• Solution: Follow the manufacturer’s instructions for the recommended detergent dosage.

7. Sensor Malfunction

• Cause: A faulty sensor may not accurately detect whether the dishes are clean, causing the clean light to blink even after the cycle is complete.
• Solution: Contact a qualified appliance repair technician to diagnose and replace the malfunctioning sensor.

Troubleshooting Tips

• Reset the dishwasher: Pressing the “Cancel” or “Reset” button may resolve minor glitches.
• Check the door latch: Ensure that the door is properly closed and latched.
• Inspect the drain hose: Look for kinks or blockages that may hinder drainage.
• Clean the filter regularly: Remove and clean the filter every 2-3 months to prevent clogging.
• Avoid overfilling: Load the dishwasher according to the manufacturer’s recommendations.
• Use the correct detergent: Follow the manufacturer’s instructions for the appropriate detergent dosage.

Seeking Professional Assistance

If the above troubleshooting steps do not resolve the blinking clean light issue, it is advisable to contact a qualified appliance repair technician. They have the expertise and experience to diagnose and repair more complex problems.

The Bottom Line: Restoring Dishwasher Functionality

By understanding the potential causes behind the blinking clean light on your KitchenAid dishwasher, you can effectively troubleshoot and resolve the issue. Remember, regular maintenance and proper usage can help prevent future problems and ensure optimal dishwasher performance.

What You Need to Know

Q: Why is the clean light blinking on my KitchenAid dishwasher even after the cycle is complete?
A: This could indicate a sensor malfunction or a faulty water inlet valve. Contact a qualified appliance repair technician for assistance.

Q: What should I do if the drain hose is kinked?
A: Unkink the drain hose and ensure that it is not crushed or blocked. Restart the dishwasher cycle.

Q: How often should I clean the dishwasher filter?
A: It is recommended to clean the dishwasher filter every 2-3 months to prevent clogging and ensure efficient drainage.