What To Know
- Whether you’re battling a clogged filter or a faulty drain pump, we’ve got you covered.
- Place a small bucket or bowl beneath the hose to catch any water that may drain out.
- Once the drain hose and pump are clear, reattach the hose to the dishwasher.
Is your Whirlpool dishwasher giving you a headache with its persistent water retention? Fret not, for draining it is a piece of cake with our comprehensive guide. Whether you’re battling a clogged filter or a faulty drain pump, we’ve got you covered.
Essential Tools and Materials
Before embarking on this draining endeavor, gather these essentials:
- Towels or a wet/dry vacuum
- Small bucket or bowl
- Screwdriver (optional)
Step 1: Safety First
Unplug the dishwasher from the power outlet and turn off the water supply. This ensures your safety throughout the process.
Step 2: Locate the Drain Hose
Identify the drain hose, typically connected to the bottom of the dishwasher. It may be located near the back or side of the appliance.
Step 3: Disconnect the Drain Hose
Carefully disconnect the drain hose from the dishwasher. Place a small bucket or bowl beneath the hose to catch any water that may drain out.
Step 4: Clean the Drain Hose
Inspect the drain hose for any clogs or debris. If you spot any blockages, use a small screwdriver or a wire to gently dislodge them.
Step 5: Check the Drain Pump
Locate the drain pump, usually situated at the bottom of the dishwasher. Ensure that the pump is not clogged or jammed. If necessary, use a screwdriver to unscrew the pump and remove any obstructions.
Step 6: Reattach the Drain Hose
Once the drain hose and pump are clear, reattach the hose to the dishwasher. Tighten the connection securely.
Step 7: Run a Test Cycle
Plug the dishwasher back into the power outlet and turn on the water supply. Run a short test cycle to ensure that the dishwasher is draining properly.
Troubleshooting Common Drainage Issues
Clogged Filter
A clogged filter can prevent proper drainage. Remove the filter and clean it thoroughly under running water.
Faulty Drain Pump
If the drain pump is not functioning correctly, it may need to be replaced. Contact a qualified technician for assistance.
Kinked Drain Hose
Inspect the drain hose for any kinks or bends that could restrict water flow. Straighten out the hose to resolve the issue.
Air Gap Clog
If your dishwasher has an air gap, check if it is clogged. Clean the air gap by unscrewing it and removing any debris.
Conclusion: Reclaim Your Dishwasher’s Drainage Prowess
With these simple steps, you can effectively drain your Whirlpool dishwasher and restore its draining capabilities. Remember, regular maintenance, such as cleaning the filter and checking the drain hose, can prevent future drainage problems.
Popular Questions
How often should I clean the dishwasher filter?
Clean the filter every 1-2 months to prevent clogs.
Can I use bleach to clean the dishwasher filter?
Yes, you can use diluted bleach (1/4 cup bleach to 1 gallon of water) to clean the filter.
What causes a dishwasher to not drain properly?
Clogged filters, faulty drain pumps, kinked drain hoses, and air gap clogs can all lead to drainage issues.
