What To Know
- If the float switch becomes stuck or the float is damaged, it can cause the dishwasher to flash the “Clean”.
- If the control board becomes faulty, it can cause the dishwasher to display erratic behavior, including flashing the “Clean”.
- It could indicate a clogged filter, a faulty door latch, or a malfunctioning drain pump.
If your Whirlpool dishwasher is persistently flashing the “Clean” light, leaving you puzzled and frustrated, you’re not alone. This perplexing issue can stem from various underlying causes, ranging from minor glitches to more serious malfunctions. In this comprehensive guide, we’ll explore the reasons behind this enigmatic behavior and provide practical solutions to restore your dishwasher to its pristine state.
Troubleshooting the Whirlpool Dishwasher Flashing Clean Issue
1. Power Reset
A simple power reset can often resolve minor glitches that cause the dishwasher to flash the “Clean” light. To perform a power reset:
- Unplug the dishwasher from the power outlet.
- Wait for 30 seconds.
- Plug the dishwasher back in.
- Restart the dishwasher cycle.
2. Check the Door Latch
A faulty door latch can prevent the dishwasher from detecting that it’s closed properly, causing the “Clean” light to flash. Inspect the door latch for any damage or obstructions and ensure that it securely engages with the door strike.
3. Clean the Filter
Clogged or dirty filters can restrict water flow and trigger the “Clean” light. Remove the filter and clean it thoroughly with hot water and a mild detergent.
4. Inspect the Float Switch
The float switch is a safety device that prevents the dishwasher from overflowing. If the float switch becomes stuck or the float is damaged, it can cause the dishwasher to flash the “Clean” light. Check the float switch for any debris or obstructions.
5. Test the Drain Pump
A malfunctioning drain pump can prevent the dishwasher from draining properly, leading to the “Clean” light flashing. Listen for unusual noises during the drain cycle and check the drain hose for any kinks or clogs.
6. Examine the Control Board
The control board is the brain of the dishwasher, controlling all its functions. If the control board becomes faulty, it can cause the dishwasher to display erratic behavior, including flashing the “Clean” light.
7. Contact Whirlpool Support
If you’ve tried all the above troubleshooting steps and the “Clean” light is still flashing, it’s advisable to contact Whirlpool support for further assistance. They can diagnose the issue remotely or schedule a technician visit to resolve the problem.
Final Note: Reclaiming Dishwasher Serenity
By understanding the potential causes of the flashing “Clean” light on your Whirlpool dishwasher and following the troubleshooting steps outlined above, you can restore your dishwasher to its optimal performance. If the issue persists, don’t hesitate to contact Whirlpool support for professional assistance. With the right diagnosis and repairs, your dishwasher will soon be sparkling clean and running smoothly again.
Frequently Asked Questions
1. Why does my Whirlpool dishwasher keep flashing “Clean” after it’s finished a cycle?
- It could indicate a clogged filter, a faulty door latch, or a malfunctioning drain pump.
2. How do I reset my Whirlpool dishwasher?
- Unplug the dishwasher for 30 seconds, then plug it back in and restart the cycle.
3. What causes the Whirlpool dishwasher to flash “Clean” when the door is open?
- This usually indicates a faulty door latch that needs to be replaced.
4. How do I clean the filter on my Whirlpool dishwasher?
- Locate the filter at the bottom of the dishwasher and remove it. Rinse it thoroughly with hot water and a mild detergent.
5. What happens if the float switch in my Whirlpool dishwasher is stuck?
- A stuck float switch can prevent the dishwasher from draining properly, causing the “Clean” light to flash.
