What To Know
- A malfunctioning door latch can prevent the dishwasher from starting or completing a cycle, causing the clean light to blink.
- A clogged or dirty filter can restrict water flow, leading to the clean light blinking as the dishwasher struggles to clean properly.
- The control board is the brain of the dishwasher, and a faulty board can disrupt the dishwasher’s operations, including the clean light.
A blinking clean light on your Whirlpool dishwasher can be a perplexing issue that leaves you wondering what’s wrong. This blog post aims to shed light on this matter, providing you with a comprehensive guide to diagnosing and resolving the problem.
Possible Causes of a Blinking Clean Light
1. Faulty Door Latch: A malfunctioning door latch can prevent the dishwasher from starting or completing a cycle, causing the clean light to blink.
2. Dirty or Clogged Filter: A clogged or dirty filter can restrict water flow, leading to the clean light blinking as the dishwasher struggles to clean properly.
3. Faulty Water Inlet Valve: A faulty water inlet valve can fail to supply enough water to the dishwasher, resulting in a blinking clean light.
4. Blocked Drain Hose: A blocked drain hose can prevent water from draining from the dishwasher, causing the clean light to blink.
5. Faulty Control Board: The control board is the brain of the dishwasher, and a faulty board can disrupt the dishwasher’s operations, including the clean light.
6. Overloaded Dishwasher: Overloading the dishwasher can prevent dishes from getting properly cleaned and cause the clean light to blink.
7. Low Water Pressure: Insufficient water pressure can hinder the dishwasher’s ability to clean effectively, leading to a blinking clean light.
Troubleshooting Steps
1. Check the Door Latch: Ensure that the door is properly closed and that the latch is securely engaged.
2. Clean the Filter: Remove the filter from the bottom of the dishwasher and clean it thoroughly with warm, soapy water.
3. Test the Water Inlet Valve: Disconnect the water supply line and open the valve. If water flows freely, the valve is likely functioning properly.
4. Unclog the Drain Hose: Disconnect the drain hose from the dishwasher and check for any blockages or kinks.
5. Reset the Dishwasher: Unplug the dishwasher from the power outlet for 30 seconds, then plug it back in. This may reset the control board and resolve the issue.
6. Contact a Professional: If the troubleshooting steps above do not resolve the problem, contact a qualified appliance repair technician for further assistance.
Additional Tips
- Use the recommended amount of dishwasher detergent.
- Rinse dishes thoroughly before loading them into the dishwasher.
- Avoid overloading the dishwasher.
- Run a cleaning cycle with a dishwasher cleaner periodically to maintain the dishwasher’s performance.
Wrapping Up
Understanding why your Whirlpool dishwasher clean light is blinking is essential for resolving the issue and ensuring optimal performance. By following the troubleshooting steps outlined in this blog post, you can diagnose and fix the problem effectively. Remember to exercise caution and contact a professional if necessary.
What People Want to Know
Q: Why is my Whirlpool dishwasher blinking after a cycle is complete?
A: This could indicate a problem with the door latch or a clogged filter.
Q: Can a faulty control board cause the clean light to blink?
A: Yes, a faulty control board can disrupt the dishwasher’s operations, including the clean light.
Q: What should I do if my dishwasher is overloaded and the clean light is blinking?
A: Unload some of the dishes and restart the dishwasher.
