What To Know
- Replacing a broken or damaged KitchenAid microwave handle is a relatively simple task that can be completed in under an hour.
- Use a clean cloth to wipe down the surface of the microwave door where the handle was attached.
- Replacing a KitchenAid microwave handle is a simple task that can be completed in under an hour.
Replacing a broken or damaged KitchenAid microwave handle is a relatively simple task that can be completed in under an hour. With the right tools and a little bit of patience, you can have your microwave looking like new again in no time.
Materials You’ll Need
Before you begin, gather the following materials:
- New KitchenAid microwave handle
- Phillips head screwdriver
- Flathead screwdriver (optional)
- Clean cloth
Step-by-Step Instructions
1. Unplug the Microwave
Before you do anything else, unplug the microwave from the electrical outlet. This will prevent any risk of electrical shock.
2. Remove the Screws
Locate the two screws that hold the handle in place. They are typically located on the underside of the microwave door. Use a Phillips head screwdriver to remove the screws.
3. Pull Off the Old Handle
Once the screws are removed, you should be able to pull the old handle straight off the door. If it is stuck, you can gently pry it off using a flathead screwdriver.
4. Clean the Surface
Use a clean cloth to wipe down the surface of the microwave door where the handle was attached. This will remove any dirt or debris that could interfere with the installation of the new handle.
5. Align the New Handle
Take the new handle and align it with the holes on the microwave door. Make sure that the handle is facing the correct direction.
6. Insert the Screws
Insert the two screws into the holes on the microwave door. Tighten the screws until they are snug, but do not overtighten them.
7. Plug in the Microwave
Once the handle is installed, plug the microwave back into the electrical outlet. You can now test the microwave to make sure that the handle is working properly.
Troubleshooting
If you encounter any problems while replacing the handle, here are a few troubleshooting tips:
- The handle is loose: If the handle is loose, it is likely that the screws are not tight enough. Tighten the screws until the handle is secure.
- The handle is crooked: If the handle is crooked, it is likely that it was not aligned properly when it was installed. Remove the screws and reattach the handle, making sure that it is aligned correctly.
- The handle is broken: If the handle is broken, you will need to replace it with a new one.
Key Points
Replacing a KitchenAid microwave handle is a simple task that can be completed in under an hour. With the right tools and a little bit of patience, you can have your microwave looking like new again in no time.
Answers to Your Most Common Questions
Q: What type of screwdriver do I need to replace the handle?
A: You will need a Phillips head screwdriver.
Q: How do I know if the handle is installed correctly?
A: The handle should be tight and secure. It should not be loose or crooked.
Q: What should I do if the handle is broken?
A: If the handle is broken, you will need to replace it with a new one.
