Unlock the secrets: how to effortlessly level your new ge refrigerator for optimal performance
Are you a proud owner of a new GE refrigerator? Congratulations! To ensure optimal performance and longevity of your appliance, it’s crucial to level it properly. Here’s a comprehensive guide on how to level new GE refrigerator:
Gather Necessary Tools
Before you begin, gather the following tools:
- Level
- Adjustable wrench
- Screwdriver
- Flashlight (optional)
Step 1: Remove the Front Grille
Locate the front grille at the bottom of the refrigerator. It’s usually held in place by screws or clips. Remove the screws or release the clips to detach the grille.
Step 2: Adjust the Front Leveling Legs
Once the grille is removed, you’ll see two leveling legs near the front of the refrigerator. Use the adjustable wrench to turn the legs clockwise or counterclockwise to raise or lower them.
Step 3: Level the Refrigerator from Front to Back
Place the level on the top of the refrigerator, parallel to the front edge. Adjust the front leveling legs until the bubble in the level is centered.
Step 4: Remove the Back Grille
Locate the back grille at the bottom of the refrigerator. It may be held in place by screws or clips. Remove the grille as you did with the front grille.
Step 5: Adjust the Rear Leveling Legs
Inside the back grille, you’ll find two more leveling legs. Use the adjustable wrench to turn the legs and level the refrigerator from side to side.
Step 6: Recheck the Front Leveling
Once the rear legs are adjusted, re-check the front leveling using the level. Make any necessary adjustments to ensure the refrigerator is level from front to back and side to side.
Step 7: Tighten the Leveling Legs
Use the adjustable wrench to tighten all four leveling legs securely. This will prevent the refrigerator from moving or becoming unlevel.
Step 8: Replace the Grilles
Reattach the front and back grilles to the refrigerator. Ensure they are securely in place.
Troubleshooting Tips
- If the refrigerator is still not level after following these steps, check the floor for unevenness.
- If the leveling legs are fully extended and the refrigerator is still not level, you may need to use shims or a leveling pad.
- If you encounter any difficulties, consult the user manual or contact GE customer support.
Final Thoughts
Leveling your new GE refrigerator is an essential step that ensures its proper operation and extends its lifespan. By following these detailed instructions, you can easily complete this task and enjoy a perfectly leveled refrigerator.
Information You Need to Know
Q: How often should I level my refrigerator?
A: It’s recommended to level your refrigerator every 6-12 months or whenever it’s moved.
Q: Can I level my refrigerator without a level?
A: It’s not advisable as a level provides accurate measurements. However, you can use a glass of water placed on top of the refrigerator. If the water stays still, the refrigerator is likely level.
Q: What happens if my refrigerator is not level?
A: An unlevel refrigerator can cause uneven cooling, increased noise, and premature wear on the compressor.