What To Know
- Water accumulation at the back of LG refrigerators is a common issue that can lead to various problems, including mold growth, foul odors, and even damage to the appliance.
- This issue typically occurs due to a buildup of frost or ice on the evaporator coils, which prevents proper airflow and causes water to collect.
- The evaporator coils are located at the back of the refrigerator, usually covered by a plastic panel.
Water accumulation at the back of LG refrigerators is a common issue that can lead to various problems, including mold growth, foul odors, and even damage to the appliance. This issue typically occurs due to a buildup of frost or ice on the evaporator coils, which prevents proper airflow and causes water to collect.
Tools and Materials Required
Before you begin, gather the following tools and materials:
- A flat-head screwdriver
- A Phillips-head screwdriver
- A towel or rags
- A wet/dry vacuum cleaner (optional)
Step-by-Step Guide to Removing Water from LG Refrigerator Back Side
1. Unplug the Refrigerator
For safety, always unplug the refrigerator before performing any maintenance.
2. Remove the Back Panel
Locate the screws holding the back panel in place and remove them using the appropriate screwdriver. Carefully lift off the back panel.
3. Locate the Evaporator Coils
The evaporator coils are located at the back of the refrigerator, usually covered by a plastic panel. Remove the panel to expose the coils.
4. Defrost the Coils
Use a hair dryer or heat gun to defrost the coils. Hold the heat source about 6 inches away from the coils and move it around slowly. Avoid using excessive heat, as it can damage the coils.
5. Clean the Drain Pan
Below the evaporator coils is a drain pan that collects water. Remove the drain pan and clean it thoroughly with warm water and soap. Ensure that the drain hole is clear of any blockages.
6. Clean the Condenser Coils
The condenser coils are located at the bottom or back of the refrigerator. They help dissipate heat from the refrigerant. Clean the coils using a soft brush or vacuum cleaner.
7. Reassemble the Refrigerator
Once all the components are clean and dry, reassemble the refrigerator in reverse order. Make sure to tighten the screws securely.
Tips for Preventing Water Accumulation
- Keep the refrigerator door closed properly to prevent warm air from entering and causing condensation.
- Regularly clean the condenser coils to ensure proper airflow.
- Avoid overloading the refrigerator with too much food, as it can block airflow.
- If the water accumulation persists, there may be an underlying issue with the defrost system. Contact a qualified appliance repair technician for assistance.
Troubleshooting Common Issues
Why is there ice on the evaporator coils?
Ice on the evaporator coils usually indicates a defrost system malfunction.
Why is the drain pan overflowing?
A clogged drain hole or a faulty defrost system can cause the drain pan to overflow.
Why is there water dripping from the refrigerator?
Water dripping from the refrigerator can be caused by a leak in the water line or drain system.
Answers to Your Questions
Q: How often should I defrost my LG refrigerator?
A: Defrost your refrigerator every 6-12 months, depending on usage.
Q: Can I use a vacuum cleaner to clean the condenser coils?
A: Yes, but use a soft brush attachment to avoid damaging the coils.
Q: What should I do if I can’t remove the water myself?
A: Contact a qualified appliance repair technician for assistance.
