If you’re experiencing a drop in water quality or reduced ice production from your LG refrigerator, it might be time to replace the water filter. Replacing the filter regularly ensures optimal water and ice quality, so follow these simple steps to keep your fridge running smoothly.
Materials You’ll Need:
- New LG refrigerator water filter
- Clean towel
Step-by-Step Instructions:
1. Locate the Water Filter:
The water filter is usually located inside the refrigerator compartment, behind the bottom grille. Look for a blue or white plastic housing.
2. Shut Off the Water Supply:
Locate the water shut-off valve behind the refrigerator and turn it clockwise to close it.
3. Release the Filter Housing:
Press the release button or lever on the filter housing. It may be located on the top or side of the housing.
4. Remove the Old Filter:
Once the housing is released, gently pull out the old filter. Be prepared for a small amount of water to drip out.
5. Prepare the New Filter:
Remove the protective cap from the new filter and soak it in cold water for a few minutes. This helps activate the filter.
6. Insert the New Filter:
Align the new filter with the housing and push it in until it clicks into place. Make sure it is securely seated.
7. Reset the Filter Indicator:
Some LG refrigerators have a filter indicator light. To reset it, press and hold the “Filter Reset” button for a few seconds.
8. Turn on the Water Supply:
Open the water shut-off valve counterclockwise to turn on the water supply.
9. Check for Leaks:
Run water through the dispenser and check for any leaks around the filter housing. If there are leaks, ensure the filter is properly seated.
10. Enjoy Fresh, Clean Water:
Your LG refrigerator is now ready to dispense clean, refreshing water and ice.
Tips for Filter Maintenance:
- Replace the water filter every 6 months or as recommended by LG.
- If you notice a drop in water quality or ice production, replace the filter sooner.
- Use only genuine LG water filters to ensure optimal performance.
- If you go on vacation for an extended period, empty the water dispenser and replace the filter when you return.
Troubleshooting:
- If you experience any leaks after replacing the filter, ensure it is properly seated and the housing is securely fastened.
- If the water still tastes or smells bad after replacing the filter, flush the water dispenser for several minutes.
- If the filter indicator light continues to blink after replacing the filter, reset it again.
Top Questions Asked
Q: How often should I replace my LG refrigerator water filter?
A: Every 6 months or as recommended by LG.
Q: What happens if I don’t replace the water filter?
A: Water quality and ice production may decline, and contaminants can build up in the water system.
Q: Can I use a generic water filter in my LG refrigerator?
A: No, use only genuine LG water filters to ensure optimal performance.
Q: What if my refrigerator doesn‘t have a filter indicator light?
A: Mark the date of filter replacement on your calendar and replace it every 6 months.
Q: How do I know if my water filter is clogged?
A: If you notice a drop in water flow or ice production, the filter may be clogged and need to be replaced.
