Maintaining a clean and fresh water supply for your family is crucial, and regularly changing the water filter in your Kenmore refrigerator is an essential part of that. The Kenmore refrigerator model 253 features a water filter that needs to be replaced every six months or when the filter indicator light turns on. Follow this comprehensive guide to learn how to change the water filter on Kenmore refrigerator model 253 effortlessly.
Tools You’ll Need
- New Kenmore water filter (part number 46-9991)
- Clean towel or cloth
Safety Precautions
- Unplug the refrigerator from the power outlet before starting.
- Turn off the water supply to the refrigerator.
Step-by-Step Instructions
1. Locate the Water Filter
- Open the refrigerator door and remove the top grille by gently pulling it towards you.
- The water filter is located inside the grille, usually on the right side.
2. Remove the Old Filter
- Grip the old filter firmly and turn it counterclockwise to release it from the filter head.
- Pull the filter straight out.
3. Clean the Filter Housing
- Use a clean towel or cloth to wipe away any water or debris from the filter housing.
4. Insert the New Filter
- Remove the plastic cap from the new filter.
- Align the filter with the filter head and push it in until it clicks into place.
- Turn the filter clockwise to tighten it.
5. Reset the Filter Indicator
- Locate the filter indicator light on the refrigerator’s control panel.
- Press and hold the reset button for 3 seconds until the light turns off.
6. Turn on the Water Supply
- Turn the water supply back on.
- Run water from the dispenser for about 2 minutes to flush out any air or impurities.
7. Reinstall the Grille
- Insert the top grille back into its original position.
- Plug the refrigerator back into the power outlet.
Troubleshooting
- Water is leaking from the filter head: Ensure the filter is properly installed and tightened.
- Water dispenser is not working: Check if the water supply is turned on and the filter is not clogged.
- Filter indicator light is still on: Reset the filter indicator again or contact a qualified technician.
Summary
Changing the water filter on your Kenmore refrigerator model 253 is a simple and essential maintenance task that ensures the quality and safety of your drinking water. By following these detailed instructions, you can effortlessly replace the filter and keep your refrigerator running optimally. Remember, a clean water filter not only provides fresh and healthy water but also extends the life of your refrigerator.
Basics You Wanted To Know
1. How often should I change the water filter in my Kenmore refrigerator model 253?
Every six months or when the filter indicator light turns on.
2. Where can I find a replacement water filter for my Kenmore refrigerator model 253?
You can purchase a replacement filter from Sears, Home Depot, or Amazon.
3. Can I use a different water filter brand in my Kenmore refrigerator model 253?
It is recommended to use the Kenmore brand water filter (part number 46-9991) to ensure optimal performance and compatibility.
4. What happens if I don’t change the water filter regularly?
A clogged water filter can lead to reduced water flow, poor water quality, and potential damage to the refrigerator.
5. Can I reset the filter indicator light without replacing the filter?
No, the filter indicator light is designed to remind you to replace the filter. Resetting it without replacing the filter will not provide you with clean and fresh water.
