What To Know
- If the water dispenser is not working after changing the filter, ensure the water supply is turned on and the filter indicator light has been reset.
- If the water still tastes or smells bad, it may indicate a problem with the water supply or the refrigerator itself.
- Changing the water filter in your Jenn-Air side-by-side refrigerator is a simple and essential task that ensures the quality and purity of your drinking water.
Maintaining a clean and efficient refrigerator water filter is paramount for ensuring the purity and freshness of your drinking water. If you own a Jenn-Air side-by-side refrigerator, it’s essential to know how to change the water filter regularly. This comprehensive guide will walk you through the simple steps involved in this task, empowering you to enjoy crystal-clear, great-tasting water.
Understanding the Water Filter Location
The water filter in a Jenn-Air side-by-side refrigerator is typically located in one of two places:
- Inside the refrigerator compartment: Look for a removable panel or cover on the ceiling of the fridge, usually near the rear.
- Behind the grille of the refrigerator: Locate the grille at the bottom of the fridge and remove it by pressing on the release tabs. The water filter will be visible behind the grille.
Required Tools and Materials
Before you begin, gather the following items:
- New Jenn-Air water filter cartridge
- Clean cloth or paper towels
- Screwdriver (if necessary)
Step-by-Step Guide: Changing the Water Filter
1. Turn Off Water Supply:
Locate the water supply line behind the refrigerator and turn off the valve.
2. Remove the Old Filter:
- Inside the refrigerator: Press the release button or tab on the filter cover and pull the old filter straight down.
- Behind the grille: Use a screwdriver to remove the screw holding the filter in place. Then, turn the filter counterclockwise to detach it.
3. Inspect the O-Rings:
Check the O-rings on the old filter for any damage or wear. If necessary, replace them with new O-rings.
4. Install the New Filter:
- Inside the refrigerator: Insert the new filter into the housing and push it up as far as it goes.
- Behind the grille: Align the new filter with the housing and turn it clockwise to secure it.
5. Reset the Filter Indicator:
Locate the filter indicator light on the refrigerator’s control panel. Press and hold the reset button until the light turns off.
6. Run Water Through the Filter:
Turn on the water supply and run water through the dispenser for several minutes to flush out any air or impurities.
7. Enjoy Clean, Filtered Water:
Your Jenn-Air side-by-side refrigerator is now equipped with a new water filter, providing you with pure, refreshing drinking water.
Troubleshooting Tips
- If water is leaking from the filter housing, check that the filter is properly installed and the O-rings are intact.
- If the water dispenser is not working after changing the filter, ensure the water supply is turned on and the filter indicator light has been reset.
- If the water still tastes or smells bad, it may indicate a problem with the water supply or the refrigerator itself. Contact a qualified technician for assistance.
Frequently Asked Questions (FAQs)
1. How often should I change my Jenn-Air refrigerator water filter?
Every 6 months or when the filter indicator light turns on.
2. What happens if I don’t change the water filter regularly?
The water quality will deteriorate, and the filter may become clogged, reducing water flow and potentially harboring bacteria.
3. Can I use a different brand of water filter?
No, it’s recommended to use only genuine Jenn-Air water filters to ensure proper fit and performance.
4. Where can I purchase a replacement water filter?
You can purchase replacement filters from Jenn-Air’s website, local appliance stores, or online retailers.
5. How long does it take to change the water filter?
Typically, it takes around 5-10 minutes.
6. Can I flush the water filter instead of changing it?
No, flushing the filter will not remove all contaminants and should not be considered a substitute for changing the filter.
7. What are the benefits of using a water filter?
- Improved water taste and odor
- Reduced contaminants, such as chlorine and lead
- Extended refrigerator life by protecting the ice maker and other water-using components
Final Thoughts: Pure and Refreshing Water at Your Fingertips
Changing the water filter in your Jenn-Air side-by-side refrigerator is a simple and essential task that ensures the quality and purity of your drinking water. By following the steps outlined in this guide, you can effortlessly maintain a clean and efficient water filtration system, providing you with peace of mind and refreshing, great-tasting water for years to come.
