Ironing is a necessary chore that can be made easier with the right tools. One of those tools is a sturdy ironing board. But what happens when the handle breaks? Don’t worry, it’s a common problem with an easy fix. In this comprehensive guide, we’ll walk you through the steps on how to fix an ironing board handle, empowering you to tackle this repair with confidence.
Tools and Materials You’ll Need
Before you start, gather the following tools and materials:
- Screwdriver (Phillips or flathead, depending on your ironing board)
- Replacement handle (if necessary)
- Drill (optional)
- Wood glue (optional)
Step-by-Step Guide
1. Examine the Handle
Inspect the handle to determine the extent of the damage. If it’s simply loose, you may be able to tighten it. If it’s broken, you’ll need to replace it.
2. Remove the Old Handle (if Broken)
If the handle is broken, you’ll need to remove the old one. Use a screwdriver to remove the screws that hold the handle in place. If the screws are rusted, you may need to use a penetrating oil to loosen them.
3. Install the New Handle (if Replaced)
If you’re replacing the handle, align the new handle with the holes on the ironing board. Insert the screws and tighten them securely.
4. Tighten the Loose Handle (if Not Broken)
If the handle is simply loose, use a screwdriver to tighten the screws. Be careful not to overtighten them, as you could damage the handle or the ironing board.
5. Reinforce the Handle (Optional)
For added strength, you can reinforce the handle with wood glue. Apply a thin layer of glue to the inside of the handle and the ironing board where the handle attaches. Press the handle into place and hold it firmly until the glue dries.
6. Drill New Holes (Optional)
If the handle is loose and the screws won‘t tighten, you may need to drill new holes. Use a drill to create new holes slightly larger than the screws. Insert the screws and tighten them securely.
7. Test the Handle
Once you’ve repaired or replaced the handle, test it to make sure it’s secure. Iron a piece of fabric to ensure that the handle can withstand the pressure.
Finish Strong
Congratulations! You’ve successfully fixed your ironing board handle. Now you can enjoy a smooth and effortless ironing experience.
Wrapping Up
Fixing an ironing board handle is a simple and straightforward task that can be completed in a few easy steps. By following this guide, you can restore your ironing board to its former glory and make ironing a breeze. Remember, a well-maintained ironing board will serve you for years to come.
Basics You Wanted To Know
Q: Can I fix the handle if it’s made of plastic?
A: Yes, you can repair a plastic handle using super glue or epoxy. Clean the surfaces to be glued, apply the adhesive, and hold the handle in place until the glue dries.
Q: What if the ironing board is made of metal?
A: If the ironing board is made of metal, you may need to weld the broken handle back into place. This is a more advanced repair that requires specialized tools and skills.
Q: How often should I check the ironing board handle?
A: It’s a good idea to check the ironing board handle regularly, especially if you use it frequently. Tighten any loose screws and inspect the handle for cracks or damage. By performing regular maintenance, you can prevent the handle from breaking and ensure the safety and longevity of your ironing board.
