What To Know
- The reset button is typically located on the front or side panel of the ice maker.
- Ensure that the water supply to the ice maker is turned on and that there are no leaks or blockages in the water line.
- Remove the ice maker from the freezer and clean all the components, including the evaporator coils and the ice bucket.
If your Fisher Paykel ice maker has stopped producing ice, resetting it may be the solution. Resetting the ice maker will restore its factory settings and potentially fix any minor issues that may be causing the problem. Here’s a step-by-step guide on how to reset your Fisher Paykel ice maker:
1. Locate the Reset Button
The reset button is typically located on the front or side panel of the ice maker. It may be a small, recessed button or a lever.
2. Press and Hold the Reset Button
Once you’ve located the reset button, press and hold it for 5-10 seconds. The ice maker will beep or flash to indicate that it has been reset.
3. Release the Reset Button
After holding the reset button for the required time, release it. The ice maker will now begin its reset process.
4. Wait for the Reset Cycle to Complete
The reset cycle usually takes a few minutes to complete. During this time, the ice maker may make noises or behave erratically. This is normal and should not be a cause for concern.
5. Test the Ice Maker
Once the reset cycle is complete, test the ice maker by pressing the ice dispenser button. If the ice maker produces ice, the reset was successful.
Troubleshooting Common Ice Maker Issues
If resetting the ice maker does not resolve the issue, you may need to troubleshoot further:
1. Check the Water Supply
Ensure that the water supply to the ice maker is turned on and that there are no leaks or blockages in the water line.
2. Inspect the Air Filter
A clogged air filter can restrict airflow to the ice maker. Remove the air filter and clean it or replace it if necessary.
3. Clean the Ice Maker Components
Ice buildup or debris can cause the ice maker to malfunction. Remove the ice maker from the freezer and clean all the components, including the evaporator coils and the ice bucket.
4. Check the Door Switch
A faulty door switch can prevent the ice maker from operating properly. Test the door switch by opening and closing the freezer door several times.
5. Contact a Technician
If you have tried all the troubleshooting steps above and the ice maker is still not working, contact a qualified appliance technician for assistance.
Resetting Ice Makers for Different Fisher Paykel Models
The reset procedure may vary slightly for different Fisher Paykel ice maker models. Here are specific instructions for some common models:
RF23BB53
- Locate the reset button on the front panel, near the bottom.
- Press and hold the reset button for 5 seconds.
- The ice maker will beep once to indicate that it has been reset.
RF24JB53
- Locate the reset lever on the side panel of the ice maker.
- Push the lever down and hold it for 5 seconds.
- The ice maker will beep twice to indicate that it has been reset.
RF312AWRX6
- Locate the reset button on the front panel, behind the ice bin.
- Press and hold the reset button for 5 seconds.
- The ice maker will beep once to indicate that it has been reset.
Wrap-Up: Troubleshooting and Resetting Ice Maker Issues
Resetting your Fisher Paykel ice maker is a simple process that can often resolve minor issues. By following the steps outlined in this guide, you can troubleshoot and reset your ice maker effectively. If the problem persists, do not hesitate to contact a qualified appliance technician for assistance.
Questions We Hear a Lot
1. How often should I reset my Fisher Paykel ice maker?
You should only need to reset your ice maker if it is not producing ice or is malfunctioning.
2. Will resetting the ice maker delete my settings?
No, resetting the ice maker will not delete any of your settings.
3. What should I do if my ice maker still doesn’t work after resetting it?
If your ice maker still doesn’t work after resetting it, contact a qualified appliance technician.
