What To Know
- However, there may come a time when you need to remove the Ring Doorbell, perhaps to replace it with a new model or to move it to a different location.
- To do this, insert a fingernail or a flat object into the small slot at the bottom of the faceplate.
- By following the steps in this guide, you can safely and easily remove the Ring Doorbell without damaging the device or the mounting bracket.
The Ring Doorbell is a popular home security device that allows homeowners to monitor their property and answer the door from anywhere. However, there may come a time when you need to remove the Ring Doorbell, perhaps to replace it with a new model or to move it to a different location. If you don’t have the necessary tools, don’t worry – it is possible to remove the Ring Doorbell without any special equipment.
Step-by-Step Guide to Removing Ring Doorbell Without Tool
1. Power Off the Ring Doorbell
Before you begin, ensure the Ring Doorbell is powered off. This will prevent any damage to the device or injury to yourself. To power off the Ring Doorbell, simply remove the faceplate and locate the small button labeled “Setup.” Press and hold this button for 10 seconds until the light on the Ring Doorbell turns off.
2. Remove the Faceplate
Once the Ring Doorbell is powered off, you can remove the faceplate. To do this, insert a fingernail or a flat object into the small slot at the bottom of the faceplate. Gently pry the faceplate off the Ring Doorbell, taking care not to damage the device.
3. Locate the Release Button
Once the faceplate is removed, you will see the release button. This button is typically located in the center of the Ring Doorbell. It may be covered by a small rubber flap. If so, gently pry the flap off to expose the release button.
4. Press the Release Button
Press and hold the release button for 10 seconds. You may need to use a paperclip or a similar object to press the button if your fingers are too large. Once you have held the button for 10 seconds, the Ring Doorbell will detach from the mounting bracket.
5. Remove the Mounting Bracket
Once the Ring Doorbell is detached from the mounting bracket, you can remove the mounting bracket from the wall. To do this, simply unscrew the screws that are holding the mounting bracket in place. Be careful not to drop the screws.
6. Clean the Mounting Surface
Once the mounting bracket is removed, you should clean the mounting surface. This will help to ensure that the new Ring Doorbell or other device you install will adhere properly. Use a damp cloth to wipe away any dirt or debris from the mounting surface.
7. Reinstall the Ring Doorbell or New Device
Once the mounting surface is clean, you can reinstall the Ring Doorbell or install a new device. To reinstall the Ring Doorbell, simply follow the steps in reverse order. If you are installing a new device, follow the instructions included with the device.
Tips for Removing Ring Doorbell Without Tool
- Use a fingernail or a flat object to pry off the faceplate.
- Be careful not to damage the Ring Doorbell or the mounting bracket.
- Press and hold the release button for 10 seconds.
- Use a paperclip or a similar object to press the release button if your fingers are too large.
- Clean the mounting surface before reinstalling the Ring Doorbell or a new device.
Troubleshooting
If you are having trouble removing the Ring Doorbell without a tool, there are a few things you can try:
- Make sure that the Ring Doorbell is powered off.
- Use a different object to pry off the faceplate.
- Press and hold the release button for longer than 10 seconds.
- Contact Ring customer support for assistance.
Wrapping Up
Removing the Ring Doorbell without a tool is a simple process that can be completed in a few minutes. By following the steps in this guide, you can safely and easily remove the Ring Doorbell without damaging the device or the mounting bracket.
Frequently Asked Questions
Q: Can I remove the Ring Doorbell without removing the faceplate?
A: No, you need to remove the faceplate to access the release button.
Q: What do I do if the release button is stuck?
A: Try using a paperclip or a similar object to press the release button. If the button is still stuck, contact Ring customer support for assistance.
Q: Can I reinstall the Ring Doorbell without the mounting bracket?
A: No, you need the mounting bracket to reinstall the Ring Doorbell.
